Abstract:The increase in operating temperature contributes to improving the performance and fuel utilization efficiency of gas turbines. However, it also places thermal barrier coatings (TBCs) in a more demanding working environment, requiring higher sintering resistance and better mechanical properties. In the present study, HfO2 was introduced into the dual-phase LaYbZr2O7 system as a doping oxide to form the LaYb(HfxZr1-x)(2)O-7 system. The research concentrated on its phase composition, mechanical properties, and thermophysical properties. The results show that substituting Hf for Zr does not alter the dual-phase structure of the system. The mutual inhibition between the two phases and the inherent material-binding capability of Hf further reduce the grain size compared to pure LYZO. Additionally, the presence of Hf reduces the tendency of Frenkel defect formation and cation migration frequency, effectively inhibiting ion diffusion and thereby suppressing the densification and shrinkage trends of the material. The system retains relatively high hardness, fracture toughness, and low elastic modulus of the LYZO matrix, with a decrease in thermal conductivity and an increase in infrared reflectivity. These results suggest that Hf doping enhances the sintering resistance of LYZO material, making them promising for high-temperature TBCs. Our study presents a viable approach to enhance the sintering resistance of LYZO, and this methodology can be extrapolated to other rare-earth zirconates.

Low thermal conductivity Hf6Ta2O17 ceramics fabricated by solvothermal and pressure-less sintering

Solid solution mechanism and thermophysical properties of HfO2-SmTaO4 ceramics

Thermo-Physical Properties of Hexavalent Tungsten W6+-Doped Ta-Based Ceramics for Thermal/Environmental Barrier Coating Materials

(Hf0.99Ta0.01)B2-based ceramics prepared by pressureless sintering with boron additive

Effect of HfO2 content on CMAS corrosion resistance of a promising Hf6Ta2O17 ceramic for thermal barrier coatings

Strengthening Hf0.95Ta0.05B2 Ceramic With Ultrafine Grains and High-density Dislocations

Densification, Microstructure and Mechanical Properties of Ta4HfC5-based Ceramics Obtained from Synthesized Nanoscale Powder

Pressureless sintering and properties of (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C high-entropy ceramics: The effect of pyrolytic carbon

Low‐temperature reactive hot‐pressing of Ta0.2Hf0.8C‐SiC ceramics at 1700°C

Low temperature densification mechanism and properties of Ta1-Hf C solid solutions with decarbonization and phase transition of Cr3C2

High porosity and low thermal conductivity high entropy (Zr0.2Hf0.2Ti0.2Nb0.2Ta0.2)C

Enhanced Sintering Resistance in LaYbZr2O7 System Through HfO2 Doping for Thermal Insulation Ceramic Materials

Effect of TiO2 doping on the fracture toughness and thermal conductivity of HfO2 ceramic

Nanosized Hf6Ta2O17 particles reinforced HfC ceramic coating for high temperature applications

Near-Zero Thermal Expansion and High Thermal Conductivity from Ambient to Cryogenic Temperatures in Hf0.87ta0.13fe2cux

Tailoring the initial characterization of fully stabilized HfO2 with Y2O3/Ta2O5

Microstructure and mechanical behavior of TaxHf1−xC–SiC fabricated by reactive hot‐pressing: Effect of Ta:Hf ratio

Low Thermal Conductivity Without Oxygen Vacancies in Equimolar YO1.5 + TaO2.5- and YbO1.5 + TaO2.5-stabilized Tetragonal Zirconia Ceramics

Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity

Hf6Ta2O17/Ta2O5 composite ceramic: A new eutectic system

Microstructure and mechanical properties of the spark plasma sintered Ta2C ceramics