Abstract:Porous Al2TiO5 ceramics have drawn increasing attention in diverse applications owing to their low thermal expansion coefficient, and good resistance to thermal shock; however, Al2TiO5 ceramics prepared in previous studies still exhibited a relatively high density, which limited their further application in the field of high-temperature thermal insulation. Herein, we reported the successful fabrication of hierarchically porous Al2TiO5 ceramics with a unique three-dimensional skeleton structure formed by overlapped ceramic nanofibers. Results show that the introduction of SiO2 into Al2TiO5 nanofibers could significantly improve their thermal stability and meanwhile reduce their formation temperature. Al2TiO5 nanofibers with 10 mol% SiO2 exhibited a superior microstructure and excellent thermal stability, and were selected as the raw material in the subsequent preparation of corresponding porous ceramics. Porous Al2TiO5 ceramics prepared by the freeze-gel casting exhibited a unique hierarchical pore structure with large pores originating from the sublimation of ice crystal and small pores formed by the overlapped of fibers. This unique microstructure endowed porous ceramics with an ultra-high porosity (97.59–95.59%), ultra-low thermal conductivity (0.0456–0.0754 W m−1 K−1) and excellent thermal stability. Owing to these outstanding characteristics, the resulting porous Al2TiO5 ceramics are expected to be employed as the high-temperature thermal insulation material in a wide spectrum of advanced applications.

Preparation of low thermal conductivity hierarchically porous diatomite ceramics by doped with ZrSiO4 opacifier-based foam-gelcasting method

Anisotropic Porous Ceramic Material with Hierarchical Architecture for Thermal Insulation

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Porous high-entropy (Zr0.25Hf0.25Nb0.25Ti0.25)C with high strength and uniform pore structure fabricated by freeze-casting

Highly Porous Zirconia Ceramic Foams with Low Thermal Conductivity from Particle‐Stabilized Foams

Foam gel-casting preparation of SiC bonded ZrB2 porous ceramics for high-performance thermal insulation

In-situ synthesis of hierarchically high porosity ZrB 2 ceramics from carbon aerogel template with excellent performance in thermal insulation and light absorption

Facile Method for Preparing Hierarchical Al2O3-Glass Foam Ceramics with Superior Thermal Insulating Property.

Porous yttria-stabilized zirconia ceramics with low thermal conductivity via a novel foam-gelcasting method

Hierarchically porous lanthanum zirconate foams with low thermal conductivity from particle‐stabilized foams

Facile Method for Preparing Hierarchical Al 2 O 3 –Glass Foam Ceramics with Superior Thermal Insulating Property

Hierarchically porous Ca3Co4O9 ceramics prepared by freeze casting: Emerging ultra‐low thermal conductivity and apparent anisotropy

Lanthanum Zirconate Porous Ceramics with Controllable Secondary Pores for High-Temperature Thermal Insulation

Enhancing the thermal insulating properties of lanthanum zirconate porous ceramics via pore structure tailoring

Preparation of porous ceramics with waste zeolites as raw material

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

Porous (Ce0.2Zr0.2Ti0.2Sn0.2Ca0.2)O2-δ high-entropy ceramics with both high strength and low thermal conductivity

Fabrication and properties of diatomite ceramics with hierarchical pores based on direct stereolithography

Porous ceramics based on high-thermal-stability Al2O3–ZrO2 nanofibers for thermal insulation and sound absorption applications

Effects of ZrSiO4 content on properties of SiO2-based ceramics prepared by digital light processing