Abstract:3D printing technology was introduced into the manufacturing of ceramic components. To obtain a new lightweight multifunctional structure with novel structure and excellent performance, and promote the deep combination of additive manufacturing and optimization design, ZrO2(3Y)/Al2O3 hollow lattice structure ceramics with two kinds of high precision and different porosity were prepared by vat photopolymerization in this paper, and the process optimization, microstructure evolution, and performance were studied. The hollow lattice structure with good molding accuracy and porosity of 35 %–55 % was prepared by component design, optimization of slurry, degreasing, and sintering process, which effectively avoided the ceramic cracking and collapse caused by resin volatilization. When the Al2O3 content was 6 wt%, dense ZrO2(3Y)/Al2O3 ceramics with grain refinement, excellent microhardness, and fracture toughness were obtained. The relationship between lattice structure and compressive strength was analyzed by simulation and compressive test. The results show that the compressive strength of the two hollow lattice structures decreases with the increase of porosity. The maximum compressive strength of 35 %-face-centered cubic (FCC) hollow lattice structure is 326 MPa, which is significantly higher than that of body-centered cubic (BCC) structure (240 MPa) with the same porosity. The hollow lattice ceramic structure with good comprehensive performance and lightweight will lay a foundation for the application of industrial heat insulation, high temperature catalysis, and purification carrier in the future.

Enhancing the thermal insulating properties of lanthanum zirconate porous ceramics via pore structure tailoring

Lanthanum Zirconate Porous Ceramics with Controllable Secondary Pores for High-Temperature Thermal Insulation

High porosity and low thermal conductivity lanthanum zirconate porous ceramics via replica method

Hierarchically porous lanthanum zirconate foams with low thermal conductivity from particle‐stabilized foams

Rare-Earth-Zirconate Porous High-Entropy Ceramics with Unique Pore Structures for Thermal Insulating Applications

Porous yttria-stabilized zirconia ceramics with low thermal conductivity via a novel foam-gelcasting method

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Preparation of porous ceramics with waste zeolites as raw material

Porosity effect on the functional properties and energy harvesting performance of Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

A Novel Way to Fabricate Highly Porous Fibrous YSZ Ceramics with Improved Thermal and Mechanical Properties

Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity

Enhanced near infrared reflectivity in hierarchical porous La2Zr2O7 microspheres produced by electro-spraying assisted phase inversion method

Oxygen‐vacancy‐mediated microstructure and thermophysical properties in Zr 3 Ln 4 O 12 for high‐temperature applications

In-situ synthesis of hierarchically high porosity ZrB 2 ceramics from carbon aerogel template with excellent performance in thermal insulation and light absorption

A novel porous La 2 Zr 2 O 7 ceramic aerogels with ultralow thermal conductivity and photocatalytic property

Achieving the synergy of low thermal conductivity and superior mechanical properties of Ce doping La2Zr2O7 ceramics for thermal protection coatings: Experiment and first-principles calculations

Enhanced Sintering Resistance in LaYbZr2O7 System Through HfO2 Doping for Thermal Insulation Ceramic Materials

3D printing of hollow lattice structures of ZrO2(3Y)/Al2O3 ceramics by vat photopolymerization: Process optimization, microstructure evolution and mechanical properties

Designing high-entropy rare-earth zirconates with tunable thermophysical properties for thermal barrier coatings

A Promising Lasmzr2o7 Ceramic with Pyrochlore Structure for Thermal Barrier Coatings

Effective Blocking of Radiative Thermal Conductivity in La2Zr2O7/LaPO4 Composites for High Temperature Thermal Insulation Applications