Abstract:This article applies and critically compares essentially all methods (based on Arrhenius temperature dependence and power law reduced mass) to deduce the degradation parameters of polyether ether ketone (PEEK) and its carbon fibre composites, PEEK+CF, from thermogravimetric analysis experiments in nitrogen. The methods used include classical (and variations) analytical approximate methods, a method applying the genetic algorithm for optimization and the Distributed Activation Energy Model, usually not discussed with the other methods. The analytical methods are fast and easy to implement but they are limited to degradation kinetics having a single peak or individual separated peaks in the mass loss rate. By contrast, the genetic algorithm gives good results if a postulated mechanism of several Arrhenius reactions of arbitrary order is considered. Moreover, the Distributed Activation Energy Model provides the possibility to assess the assumption of overlapping first-order reactions having various activation energies. The degradation of PEEK and its composite is basically characterized by two regimes, one fast degradation regime (570 °C–630 °C approximately) and one much slower degradation regime (630 °C–800 °C approximately) at a mass degradation rate with time being simply proportional to the heating rate, a very remarkable new result by itself. However, the focus of the modelling in this work lies in the first fast degradation regime. It is shown that the Distributed Activation Energy Model and the genetic algorithm can simulate well the experimental results noting, however, that the Distributed Activation Energy Model is based on more physically determined activation energies. By contrast, the classical methods (Kissinger and modified Ozawa methods) are not able to reproduce the mass loss rates in the initial fast degradation regime (570 °C–630 °C) of pure PEEK and PEEK+CF composite. Although a physical explanation of the degradation mechanisms is desirable, the end game is to find out whether a method even not including the whole truth about a process is yet capable of reproducing the measurements accurately.

An extended multi-step kinetic model for thermal degradation of ceramizable polymer

Pyrolysis kinetics of tannin–phenol–formaldehyde resin by non-isothermal thermogravimetric analysis

Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations

New Insights into Phenolic Resin Decomposition under Oxidative Conditions of High Temperature

Dipropargyl ether bisphenol A based boron-containing polymer: synthesis, characterization and molecular dynamics simulations of the resulting pyrolysis and carbonization

Mechanism Identification and Kinetics Analysis of Thermal Degradation for Carbon Fiber/Epoxy Resin

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Multicomponent Kinetic Model of Biomass Pyrolysis

Comparison of methods for thermal analysis: Application to PEEK and a composite PEEK+CF

Investigation of the thermal degradation kinetics of ceramifiable silicone rubber-based composite

SIMULATING THE PYROLYSIS OF PHENOLIC RESIN USING REACTIVE MOLECULAR DYNAMICS

Development of a pyrolysis model for oriented strand board. Part I: Kinetics and thermodynamics of the thermal decomposition

High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C

The Dual-Competitive Parallel Kinetic Model with an Efficient Optimization Algorithm for Describing Polymer Pyrolysis Accurately

Mechanism of non-charring polymer thermal degradation involving two types of heat flux absorption modes

Thermal behavior of phenolic-based ceramizable composites modified by nano-aluminum oxide

Evaluation of the thermal degradation of PC/ABS/montmorillonite nanocomposites

Curing and pyrolysis behavior of PF/B4C/PBZ composite

Kinetic Study on the Pyrolysis of Medium Density Fiberboard: Effects of Secondary Charring Reactions

High Temperature Thermomechanical Behavior of Silica-Phenolic Composite Exposed to Heat Flux Environments

Advanced Process Model for Polymer Derived Ceramic Processing