Abstract:Analytical models addressing ignition of solids under constant heat flux have been developed in previous studies utilizing surface or in-depth absorption or combination of them. When encountering time-dependent heat flux, the majority of the studies focused on polynomial heat flux and surface absorption assumption. However, in-depth absorption also should be taken into account under time-dependent heat flux in analytical models especially for infrared translucent solids. In this work, an analytical model aiming at revealing the ignition mechanism of translucent polymers under exponential time-increasing heat flux is established considering both surface and in-depth absorptions. Critical temperature is employed as ignition criterion. Four typical non-charring polymers, polymethyl methacrylate (PMMA), polyoxymethylene (POM), polyamide 6 (PA 6) and polypropylene (PP), are utilized as the reference materials, and a numerical solver is employed to validate the analytical model. The results show that the developed analytical model provides accurate predictions of surface temperature and ignition time. Surface heat loss by convection and reradiation has little effect on surface temperature, ignition time and critical energy, but it affects the ignition heat flux greatly. Thermal penetration depth differs from the one under constant heat flux, and it gets smaller as the surface heat loss is considered. The ignition time, thermal penetration depth and critical energy decrease as the heat flux increasing rate gets larger. Meanwhile, the ignition heat flux for in-depth absorption is higher than that for surface absorption, and both increase with heat flux increasing rate. Furthermore, the linearity between ignition time and the squared critical energy, proposed in constant and linear heat flux scenarios, is also found valid under this exponential heat flux condition.

Mechanism of non-charring polymer thermal degradation involving two types of heat flux absorption modes

A Numerical Study of Thermal Degradation of Polymers: Surface and In-Depth Absorption

Investigation of Thermal Decomposition of Polymer Nanocomposites with Different Char Residues

Numerical Simulation of Pyrolysis of PMMA Involving Surface and In-Depth Absorption

Numerical Simulation of Decomposition of Polymer Nano-composites: Investigation of the Influence of the Char Structure

Evaluation of the thermal degradation of PC/ABS/montmorillonite nanocomposites

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Ignition of Polymers under Exponential Heat Flux Considering Both Surface and In-Depth Absorptions

Investigation on Thermal Degradation Behavior of Typical Thermoplastics Polymer

Mechanisms and Kinetics Studies on the Thermal Decomposition of Micron Poly (methyl Methacrylate) and Polystyrene

Thermal Decomposition of Flame-retarded High Impact Polystyrene

Thermogravimetric study on thermal degradation kinetics and polymer interactions in mixed thermoplastics

Effect of Radiation Absorption Modes on Ignition Time of Translucent Polymers Subjected to Time-Dependent Heat Flux

Kinetic Analysis of PA4 Thermal Degradation: Thermal Stability with Respect to Crystallinity

Pyrolysis and combustion characterisation of HDPE/APP composites via molecular dynamics and CFD simulations

Study on Melting Behavior of Polymers During Burning

Pyrolysis Kinetics Modeling of Flame Retarded HIPS

Improved Pyrolysis Model of Polymer Materials under Windy Conditions

Study on Thermal Degradation Processes of Polyethylene Terephthalate Microplastics Using the Kinetics and Artificial Neural Networks Models

The Mechanism Study on the Cooperative Flame Resistance Effect Between HMP and NP in ABS by TG–FTIR

Development of a Semiglobal Reaction Mechanism for the Thermal Decomposition of a Polymer Containing Reactive Flame Retardants: Application to Glass-Fiber-Reinforced Polybutylene Terephthalate Blended with Aluminum Diethyl Phosphinate and Melamine Polyphosphate