Abstract:The reaction kinetics of solid fuel is a critical aspect of energy production because its energy component is determined during the process. The overall fuel quality is also evaluated to account for a defined energy need. In this study, a two-step first-order reaction mechanism was used to model the rapid mass loss of pine sawdust (PSD) during torrefaction using a thermogravimetric analyzer (Q600 SDT). The kinetic analysis was carried in a MATLAB environment using MATLAB R2020b software. Five temperature regimes including 220, 240, 260, 280, and 300 °C and a retention time of 2 h were used to study the mechanism of the solid fuel reaction. Similarly, a combined demarcation time (i.e., estimating the time that demarcates the first stage and the second stage) and iteration technique was used to determine the actual kinetic parameters describing the fuel's mass loss during the torrefaction process. The fuel's kinetic parameters were estimated, while the developed kinetic model for the process was validated using the experimental data. The solid and gas distributions of the components in the reaction mechanism were also reported. The first stage of the degradation process was characterized by the rapid mass loss evident at the start of the torrefaction process. In contrast, the second stage was characterized by the slower mass loss phase, which follows the first stage. The activation energies for the first and second stages were 10.29 and 141.28 kJ/mol, respectively, to form the solids. The developed model was reliable in predicting the mass loss of the PSD. The biochar produced from the torrefaction process contained high amounts of the intermediate product that may benefit energy production. However, the final biochar formed at the end of the process increased with the increase in torrefaction severity (i.e., increase in temperature and time).

KINETIC STUDY OF PINE SAWDUST PYROLYSIS VIA TG/DTG ANALYSIS

Kinetics of Bamboo Pyrolysis

Investigation on Kinetics of Bamboo Pyrolysis

Thermogravimetric and Kinetic Analysis of High-Temperature Thermal Conversion of Pine Wood Sawdust under CO2/Ar

Study on the Staged and Direct Fast Pyrolysis Behavior of Waste Pine Sawdust Using High Heating Rate TG-FTIR and Py-GC/MS

Kinetic analysis and pyrolysis behavior of pine needles by TG-FTIR and Py-GC/MS

Pyrolysis of Pine Sawdust by TG-FTIR Analysis

Kinetic Analysis on Non-isothermal Combustion of Several Urban Biomass Fuels

Kinetic study on the pyrolysis of some wood used in building and decoration

A comparative study: Physiochemical characterization and kinetic analysis of raw and hydrothermally treated pine sawdust

Nonisothermal Thermogravimetric Kinetic Investigations On Combustion Behaviors Of Concomitant Biomass From Urban Plants

Thermal, kinetic and thermodynamic study for co-pyrolysis of pine needles and styrofoam using thermogravimetric analysis

Evaluation of Kinetic and Thermodynamic Parameters of Pyrolysis and Combustion Processes for Bamboo Using Thermogravimetric Analysis

Kinetic study on thermal decomposition of woods in oxidative environment

Pyrolysis Characteristics and Determination of Kinetic and Thermodynamic Parameters of Raw and Torrefied Chinese Fir

Kinetic Study of the Isothermal Degradation of Pine Sawdust during Torrefaction Process

Autothermal Pyrolysis of Lignocellulosic Biomass: Experimental, Kinetic, and Thermodynamic Studies

MECHANISM STUDY OF BIOMASS PYROLYSIS BY THERMOGRAVI-METRIC ANALYSIS COUPLED WITH INFRARED SPECTROSCOPY

Thermal degradation behaviour and chemical kinetic characteristics of biomass pyrolysis using TG/DTG/DTA techniques

Thermogravimetric analysis and reaction kinetics of lignocellulosic biomass pyrolysis

Thermal decomposition of pine branch: Unified kinetic model on pyrolytic reactions in pyrolysis and combustion