Abstract:Within presented paper complex kinetic analysis of waste wood solar pyrolysis with fuel characterisation has been presented. Thermogravimetric (TGA) data were obtained for heating rates denoted in solar pyrolysis experiments: 5, 10, 15 and 20 K/min. Study presents alternative approach to lignocellulosic biomass kinetics using NETZSCH Kinetics Neo (v. 2.1.2.2) software. TGA data were enriched with the gas analyser indications and experiments results from solar pyrolysis examined on self-designed laboratory reactor. Presented methodology consisted of <a class="workspace-trigger" href="#e0005">(1)</a> isoconversional analysis: Friedman, Kissinger-Akahira-Sunose and Ozawa-Flynn-Wall analysis yielding apparent activation energies Eα, varying from 185.37 to 375.56 kJ/mol at reaction extent 0.1–0.9, <a class="workspace-trigger" href="#e0010">(2)</a> reaction model identification with generalised master plot method which showed that decomposition was driven by three-dimensional diffusion (D3) with transition to three-dimensional phase boundary (R3) and reaction order based models (F1,F2,Fn) at the end of conversion. Finally, <a class="workspace-trigger" href="#e0015">(3)</a> kinetic model construction was performed based on experiments observations, resulting in modelling of 3 main reactions of pyrolysis products formations. The most intensive condensable release was observed between 250 and 440 °C what correlated with CO2 release described by dominant two-step D3-F2 consecutive reaction with activation energies and logarithmic pre-exponential factors 159.92 kJ/mol, 10.44 log(1/s) and 256.78 kJ/mol, 19.05 log(1/s) for first and second step respectively. CO formation obeyed R3 reaction mechanism with activation energy 181 kJ/mol and pre-exponential factor 12.16 log(1/s). Last stage of pyrolysis, charring, was described by two-step consecutive reaction Fn(n = 3.463)-F2 resulting in formation of CH4 and H2 with activation energies and pre-exponential factors of 249.72 kJ/mol, 15.87 log(1/s) and 162 kJ/mol, 6.61 log(1/s) respectively. Kinetic models and isoconversional methods results were tested using Fisher-Snedecor test. Presented methodology was compared with traditional three pseudo-component wood pyrolysis model and discussed.

Kinetic study on the pyrolysis of some wood used in building and decoration

Kinetic Study on the Pyrolysis of Wood

Kinetics of Bamboo Pyrolysis

A study on wood pyrolysis and combustion characteristics using a thermal balance for simulating typical fire conditions

Kinetic Study of Thermal Decomposition and Combustion Characteristics of Wood under Thermal Radiation

Comparatively kinetic study on the pyrolysis of fire combustible biomass

KINETIC STUDY OF PINE SAWDUST PYROLYSIS VIA TG/DTG ANALYSIS

Kinetic Study on Pyrolysis and Combustion of Wood under Different Oxygen Concentrations by Using Tg-Ftir Analysis

Kinetic study on thermal decomposition of woods in oxidative environment

Kinetic Analysis on Non-isothermal Combustion of Several Urban Biomass Fuels

Nonisothermal Thermogravimetric Kinetic Investigations On Combustion Behaviors Of Concomitant Biomass From Urban Plants

Bench-scale Studies on Wood Pyrolysis under Different Environments

Insights into wood species and aging effects on pyrolysis characteristics and combustion model by multi kinetics methods and model constructions

Kinetic study on the pyrolysis of combustible textile

Study on Pyrolysis Kinetics of Bamboo

Kinetic modelling of waste wood devolatilization during pyrolysis based on thermogravimetric data and solar pyrolysis reactor performance

A Kinetic Study of the Nonisothermal Pyrolysis of Wood

Development of multi-scale pyrolysis and combustion model for fir wood

Kinetics Study on Biomass Pyrolysis for Fuel Gas Production

Evaluation of Kinetic and Thermodynamic Parameters of Pyrolysis and Combustion Processes for Bamboo Using Thermogravimetric Analysis

Kinetic analysis of the pyrolysis of wood/inorganic composites under non-isothermal conditions