Abstract:The boiling flow and heat transfer performance of four different pin-fins in microchannels are investigated through visualization experiment research. Flow boiling visualization results have been conducted by using deionized water as working fluid with circulating under flow rates in the range of 0.25~9kg/h, with the inlet temperature as 30 ℃ and heating power as 126W. The experimental results show that the flow patterns in the channel are mist flow, annular flow, isolated bubble and no bubble. And the flow pattern corresponds to the pressure change. With the increase of Re, the pressure drop in the microchannel first increases rapidly, then decreases, and finally increases again. The change process of pressure drop corresponds to the bubble heat transfer process. The corresponding heat transfer processes include film boiling、transition from film boiling to nucleation boiling、nucleation boiling and single-phase convection. At the same time, the state of bubbles in the channel can correspond to the intensity and mode of heat transfer. The average surface temperature of the bottom plate decreases with the increase of Re. The average convective heat transfer coefficient increases, then decreases and increases again with the increase of Re. The twice increases are mainly due to liquid film evaporation and single-phase flow transition. The average convective heat transfer coefficient increases with the increase of heat flux. And in four different micro-fin shapes, the heat transfer effect of triangle fin array is the best, because the disturbance of triangle to fluid is the most intense. While in the nucleation boiling region, the convective heat transfer coefficient of triangle micro-fin arrays is the largest. At that stage, the bubbles in triangle micro fin array grow and separate more easily.When the Re is less than 130, the number of bubbles in the triangle micro array is great than that in the ellipse micro array, and the bubble departure diameter is the largest, as well. And the bubble growth time and bubble waiting time are the shortest. When Re is greater than 130, the number of bubbles in the channel is relatively small, and the nucleation boiling intensity decreases. When the Re continues to increase, there are few or no bubbles in the channel, which is close to the single-phase convection. Moreover, the pressure drop, bottom temperature and convective heat transfer coefficient of triangle micro fin array change most obviously. The results show that when Re increases from 30 to 125, the bottom temperature decreases by 41 ℃, the maximum convective heat transfer coefficient reaches 16800 w / m2 · ℃, and the maximum Nu is 10.

Boiling heat transfer of water on smooth and square pin fins surfaces in minichannel

Flow Boiling Instability and Pressure Drop Characteristics Based on Micro-Pin-finned Surfaces in a Microchannel Heat Sink

Experimental Study of Saturated Flow Boiling Heat Transfer in an Array of Micro-pin-fins

Flow Boiling Heat Transfer Characteristics on Micro-Pin-finned Surfaces in a Horizontal Narrow Microchannel

Experimental Investigations of Flow Boiling Heat Transfer Performance in Finned Micro-Channels

Experimental study on two-phase pressure drop and flow boiling heat transfer in a micro pin fin channel heat sink under constant heat flux

Numerical study of the intensification of single-phase heat transfer in a sandwich-like channel using staggered miniature-pin fins

Investigation on the Contribution of Large-Scale Fluctuation and Small-Scale Disturbance of Coolant to Heat Transfer Enhancement in a Rectangular Channel with Pin Fins

Experimental study on the effect of shape on the boiling flow and heat transfer characteristics of different pin-fin microchannels

Investigation on Flow Characteristics and Its Effect on Heat Transfer Enhancement in a Wide Channel With Staggered Diamond-S Pin Fins

Local Heat Transfer of Saturated Flow Boiling in Vertical Narrow Microchannel

An Experimental Study Of Transitional Flow Friction And Heat Transfer Performance Of A Channel With Staggered Arrays Of Mini-Scale Short Pin Fins

Experimental study of flow boiling in microchannel heat sink enhanced with partially in-line pin fins fence arrangement

Numerical Study on Heat Transfer Performance of a New-proposed Pin-fin in an Internal Channel

Experimental Study Of Saturated Flow Boiling In Vertical Narrow Microchannel

Influence of the Surface Enhancement on the Flow Boiling Heat Transfer in a Minichannel

Fluid flow and heat transfer characteristics of a microstructured microchannel heat sink under flow boiling condition

Flow dynamics characteristics of flow boiling in minichannels with distributed pin fin structures

EFFECTS OF VARIOUS COOLANTS ON FLOW AND HEAT TRANSFER CHARACTERISTICS IN A ROUND-TIP PIN-FINNED INTERNAL CHANNEL

Effect of fin shapes on flow boiling heat transfer with staggered fin arrays in a heat sink

The use of enhanced surface in flow boiling heat transfer in a rectangular minichannel