Abstract:In this paper, shot peening (SP) was employed as a post-processing technique for the laser surface melted (LSMed) gear. The aim was to improve the contact fatigue performance of laser surface melting+shot peened (LSMSPed) gears. The microstructure, surface roughness, residual stress, microhardness of C40 steel gears before and after SP treatment were characterized using scanning electron microscopy, X-ray diffraction stress analyzer, contour measuring instrument, and hardness tester. Fatigue test of gear was carried out with a Forschungsstelle für Zahnräder und Getriebebau (FZG) testing machine. Following the laser surface melting (LSM) treatment, a molten layer was observed on the gear teeth surface. The experimental results indicated that SP induced a hardened layer with a certain thickness and plastic deformation on the surface of LSMed gears. Importantly, as the SP parameters increased, there's a corresponding reduction in both the average grain diameter and the maximum grain diameter. The reduction was most pronounced when the shot diameter reached its maximum value. It's worth noting that once the optimal threshold for SP parameters is surpassed, the residual compressive stress and microhardness on the LSMSPed gear surface do not exhibit a continuous growth trend. Furthermore, the rise in SP parameters resulted in a gradual increase in the surface roughness of LSMSPed gears, albeit to varying degrees. In light of the combined effects of grain refinement, residual compressive stress, microhardness, and surface roughness, the contact fatigue performance of LSMSPed gears improved with increasing SP parameters. Notably, when comparing the contact fatigue life of LSMed gears with that of LSMSPed gears, we observed a substantial enhancement. However, it's essential to highlight that when the shot diameter reaches its maximum value, the contact fatigue life of the LSMSPed gear, somewhat unexpectedly, decreased.

Improving the oxidation resistance of SIMP steel to liquid Pb-Bi eutectic by shot peening treatments

Performance of the new ferritic/martensitic steel SIMP against liquid lead‐bismuth eutectic corrosion: Comparison with T91 and 316L steels

Comparison investigation on corrosion of SIMP and T91 exposed to liquid LBE at 450°C: the role of Si on reducing oxidation rate

Effect of surface shot peening on the microstructure and mechanical properties of fuel cladding 1515-Ti austenitic steel

Corrosion Properties of 34CrMo4 Steel Modified by Shot Peening.

Surface characteristic and corrosion resistance of different plasma-sprayed coatings (Zn, Al6061and Zn/23Al) on S960 high strength steel with subsequent micro-shot peening

Microstructure and mechanical properties of laser shock peened 38CrSi steel

Effect of laser shock peening and surface mechanical attrition treatment on the oxidation resistance of a 20Cr-25Ni-Nb stainless steel

The influence of shot peening on mechanical properties, wear, and corrosion resistance of 42CrMo steel

The effect of shot peening on the contact fatigue performance of C40 steel gears after laser surface melting

Shot peening coverage effect on laser powder bed fused steel

Influence of temperature on the microstructural evolution of SIMP and T91 steels in liquid lead-bismuth eutectic: Experiments and molecular dynamics simulations

Surface Modification of 304 Steel Using Triple-Step Shot Peening

Effect of Combined Laser Shock Peening and Nitrogen Implantation on the Microstructure and Tribology of M50 Bearing Steel

Enhanced Carbon Diffusion Efficiency and Work Hardening Effect of AISI 9310 Steel Via Pre-Laser Shock Peening

Effect of shot peening on surface characteristics and high-temperature corrosion behaviour of super 13Cr martensitic stainless steel

Improved Pitting Corrosion Resistance of AISI 316L Stainless Steel Treated by High Current Pulsed Electron Beam

Microstructure evolution and electroplasticity in Ti64 subjected to electropulsing-assisted laser shock peening

Obvious improvement in electrochemical and long-term immersion corrosion resistance of AISI 420 martensitic stainless steel using laser shock peening

Revealing the relationship between the shot type and fatigue performance of laser powder bed fused 304L steel following shot peening

Microstructure and Mechanical Property of Ti and Ti6Al4V Prepared by an In-Situ Shot Peening Assisted Cold Spraying