Abstract:Mechanical properties of Al alloys make them an ideal candidate for different sections of marine, aerospace, automotive, etc. industries. Recently taking the advantages of additive manufacturing (AM), many complex infrastructures/components can be fabricated with very high design freedom via Al alloys. Although Al alloys have good natural corrosion resistance, however improving this property attracts lots of attention in the past few years. Post-processing methods can play a key role for addressing the issues related to internal and surface anomalies associated with as-built AM parts. Generally, these anomalies have detrimental effects on mechanical properties. In the present study, the effect of laser shock peening (LSP) treatment with different laser pulse overlaps and energies was investigated comprehensively on microstructure, surface texture, porosity, hardness, residual stresses as well as corrosion resistance of laser powder bed fused (L-PBF) AlSi10Mg samples. LSP provides strain deformation on the surface, and the deformation enhances by laser beam energy. LSP1 (laser energy of 1.5 J and 50% overlap) and LSP3 (laser energy of 4.5 J and 50% overlap) introduce maximum local strain of 7.5 and 10.7, respectively. The surface roughness of as-built state μm in terms of Rv was effectively diminished to 16.33 after LSP6 (laser energy of 4.5 J and 75% overlap). The results indicated that due to the modified surface texture, improved hardness and induced high compressive residual stresses in the surface layer. (surface hardness improvement and inducing high surface compressive residual stresses were obtained after LSP6 up to 26% and −289 MPa, respectively); the LSP treated samples exhibited higher corrosion resistance with the corrosion rate decreasing down to 50% as compared to the as-built state.

Obvious improvement in electrochemical and long-term immersion corrosion resistance of AISI 420 martensitic stainless steel using laser shock peening

Laser shock peening-induced carbide evolution and remarkable improvement in electrochemical and long-term immersion corrosion resistance of 2Cr12NiMoWV martensitic stainless steel

Enhancement of corrosion resistance of 304L stainless steel treated by massive laser shock peening

Effects of Laser Shock Processing on Corrosion Resistance of AISI 304 Stainless Steel in Acid Chloride Solution

Influence of Surface Modifications by Laser Shock Processing on the Acid Chloride Stress Corrosion Cracking Susceptibility of AISI 304 Stainless Steel

Effect of laser shock peening on the dissolution of precipitates and pitting corrosion of AA6061-T6 with different original surface roughness

Laser shock peening induced surface nanocrystallization and martensite transformation in austenitic stainless steel

Laser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel

Effect of Laser Shock Peening on Electrochemistry and Wettability of Additively Manufactured Stainless Steel

Revealing the fretting corrosion mechanisms of laser shock peened cold spray 316 L stainless steel

Pitting resistance of 316 stainless steel after laser shock peening: Determinants of microstructural and mechanical modifications

Carbide-facilitated nanocrystallization of martensitic laths and carbide deformation in AISI 420 stainless steel during laser shock peening

Enhance corrosion resistance of 304 stainless steel using nanosecond pulsed laser surface processing

Femtosecond Laser Treatment for Improving the Corrosion Resistance of Selective Laser Melted 17-4PH Stainless Steel

Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless Steel Weldments Subjected to Cavitation Erosion

Effects of Multiple Laser Shock Peening Impacts on Microstructure and Wear Performance of Wire-Based Laser Directed Energy Deposition 17-4PH Stainless Steel

Effects of Laser Shock Peening on Corrosion Resistance of Additive Manufactured AlSi10Mg

Residual Stress Distribution and Microstructure at a Laser Spot of AISI 304 Stainless Steel Subjected to Different Laser Shock Peening Impacts

Progress on microstructure and residual stress evolution and corrosion behavior in SP-, LSP- and WJP-treated austenitic stainless steels

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Enhanced Carbon Diffusion Efficiency and Work Hardening Effect of AISI 9310 Steel Via Pre-Laser Shock Peening