Abstract:Molybdenum (Mo), which is one among the refractory metals, is a promising material with a wide variety of technological applications in microelectronics, optoelectronics, and energy conversion and storage. However, understanding the structure–property correlation and optimization at the nanoscale dimension is quite important to meet the requirements of the emerging nanoelectronics and nanophotonics. In this context, we focused our efforts to derive a comprehensive understanding of the nanoscale structure, phase, and electronic properties of nanocrystalline Mo films with variable microstructure and grain size. Molybdenum films were deposited under varying temperature (25–500 °C), which resulted in Mo films with variable grain size of 9–22 nm. The grazing incidence X-ray diffraction analyses indicate the (110) preferred growth behavior the Mo films, though there is a marked decrease in hardness and elastic modulus values. In particular, there is a sizable difference in maximum and minimum elastic modulus values; the elastic modulus decreased from ~460 to 260–280 GPa with increasing substrate temperature from 25–500 °C. The plasticity index and wear resistance index values show a dramatic change with substrate temperature and grain size. Additionally, the optical properties of the nanocrystalline Mo films evaluated by spectroscopic ellipsometry indicate a marked dependence on the growth temperature and grain size. This dependence on grain size variation was particularly notable for the refractive index where Mo films with lower grain size fell in a range between ~2.75–3.75 across the measured wavelength as opposed to the range of 1.5–2.5 for samples deposited at temperatures of 400–500 °C, where the grain size is relatively higher. The conductive atomic force microscopy (AFM) studies indicate a direct correlation with grain size variation and grain versus grain boundary conduction; the trend noted was improved electrical conductivity of the Mo films in correlation with increasing grain size. The combined ellipsometry and conductive AFM studies allowed us to optimize the structure–property correlation in nanocrystalline Mo films for application in electronics and optoelectronics.

Native surface oxidation phenomena of DC-Sputtered molybdenum thin film in tropical environment

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

Residual strain and electrical resistivity dependence of molybdenum films on DC plasma magnetron sputtering conditions

Tuning of structural and optical properties of reactively sputtered MoOx films

Study of molybdenum back contact layer to achieve adherent and efficient CIGS2 absorber thin-film solar cells

Preparation and Characterization of Molybdenum Thin Films by Direct-Current Magnetron Sputtering

Electro-Mechanical Properties of Molybdenum Thin Film On Polyethylene Terephthalate Subjected to Tensile Stress

Structural, Optical and Mechanical Properties of Nanocrystalline Molybdenum Thin Films Deposited under Variable Substrate Temperature

Impact of Mo+2 addition and thermal annealing on the surface morphology, electrical transport properties and Mott's parameters of WO3 films for potential photonic devices

Oxidation of Molybdenum-Based Single-Metallic/bimetallic Carbide MXenes in Aqueous Suspensions: Mechanistic Insights

Role of thermal heat-treatment to achieve a highly polycrystalline and compact α-MoO3 thin films

Microstructure and residual stress dependence of molybdenum films on DC magnetron sputtering conditions

Chemical Insights into the Rapid, Light-Induced Auto-Oxidation of Molybdenum Disulfide Aqueous Dispersions

Arresting the surface oxidation kinetics of bilayer 1T'-MoTe2by sulphur passivation

Solution-processed molybdenum oxide films by low-temperature annealing for improved silicon surface passivation

Oxidation-induced modulation of photoresponsivity in monolayer MoS2 with sulfur vacancies

High-energy sputtering to deposit conductive and adherent single Molybdenum layer for solar cell applications

Spectro‐Microscopic Perceptions into Oxidation Behavior of Large‐Scale Molybdenum Disulfide and its Photoelectrical Correlation

Dynamics of early-stage oxide formation on a Ni-Cr-Mo alloy

High-temperature strain-mediated oxidation of 2D MoS2

Studies of annealing impact on the morphological, opto-dielectric and mechanical behaviors of molybdenum-doped CrN coatings