Abstract:JAERI has been proposing a high-intensity proton accelerator with energy of 1.5GeV and a beam power of 8 MW for the Neutron Science Project (NSP)[1]. This paper describes a conceptual design study for the RF system; a candidate of amplifier for the low energy accelerating part, an RF system efficiency and required AC power are estimated for the high energy a ccelerating part. 1 RF SYSTEM OF NSP ACCELERATOR The NSP is aiming at exploring nuclear technologies for nuclear waste transmutation and various basic research fields such as condensed matter physics based on a proton induced spallation neutron. The accelerator will consist of RFQ, DTL for the low energy part and superconducting (SC) linac for the high energy part. It should be operated both in pulse and CW. The RF system is most costly part for a high power RF accelerator and one of the major components to determine the reliability. The accelerator is required with CW operation for application of the nuclear waste transmutation, and is required with high current pulse operation for the basic research field. This requirement is the essential feature of the NSP accelerator. A preliminary specific at on for the accelerator is given in Table 1. The final value of energy/current and pulse time structure will be determined from further discussion on the user requirement and the cost estimation. Figure 1 shows a block diagram of an RF system for the NSP accelerator. As a main option, we chose a frequency combination of 200 600 MHz for the accelerator. There is three times frequency jump between low and high energy part. In the first consideration, we chose a klystron system in the 600 MHz part. Klystrons are widely used as high power RF source and are regarded as a reliable device. Grid tubes such as a tetrode and a Diacrode will be applied in 200 MHz part. In the conceptual design, the accelerator requires the total peak RF power of about 300 kW for RFQ, 9MW for DTL and 29 MW for SC linac for the pulse operation.

LLRF System for the ESS Proton Accelerator

THE ESS SUPERCONDUCTING LINEAR ACCELERATOR

High-Level Software Tools for LLRF System Dedicated to Elliptical Cavities Management of European Spallation Source Facility

Development of high intensity neutron source at the European Spallation Source

An Overview of the Spallation Neutron Source Project

Design and performance of LLRF system for CSNS/RCS

Low Level RF System of the LIGHT Proton Therapy Linac

The European Spallation Source neutrino super-beam conceptual design report

LLRF System Considerations for a Compact, Commercial C-band Accelerator using the AMD Xilinx RF-SoC

Excess RF Power Required for RF Control of the Spallation Neutron Source (SNS) Linac, a Pulsed High-Intensity Superconducting Proton Accelerator

An RF power system for NSP high intensity proton accelerator at JAERI

Title: EXCESS RF POWER REQUIRED FOR RF CONTROL OF THE SPALLATION NEUTRON SOURCE (SNS) LINAC, A PULSED HIGH-INTENSITY SUPERCONDUCTING PROTON ACCELERATOR

A 2.45 Ghz Electron Cyclotron Resonance Proton Ion Source and A Dual-Lens Low Energy Beam Transport

A 166.6 MHz Superconducting Rf System for the HEPS Storage Ring

LLRF Control System for TTX

Particle Physics at the European Spallation Source

Cavity Simulator for European Spallation Source

SRF programs towards High-Q/High-G cavities in IJCLab

Radiation transport calculations for the European Spallation Source accelerator environment

Preliminary Design of CSNS-II Linac SRF LLRF

The HighNESS Project at the European Spallation Source: Current Status and Future Perspectives