Abstract:Heavy metals in water leads to many ecological and environmental problems. All kinds of new magnetic adsorbents are used to adsorb the heavy metals in the aqueous solution, which has the advantages of high efficiency, low consumption, simplicity, convenience, and industrialization. Firstly, Fe 3 O 4 is dissolved, and polyethylene glycol (PEG) and anhydrous sodium acetate are added. The dissolved product is placed in the reaction kettle lined with Teflon and reacts at a high temperature to obtain the Fe 3 O 4 magnetic microspheres. The product is dissolved again. After the ultrasonic water bath, 1 mL tetraethyl orthosilicate (TEOS) is added drop by drop to obtain the SiO 2 /Fe 3 O 4 magnetic microspheres by the ultrasonic and water-bath stirring. The magnetic microspheres are dissolved in 10 mL 3% chitosan solution. Chitosan/SiO 2 /Fe 3 O 4 (CSF) magnetic adsorbent is obtained after ultrasonic agitation, and chitosan-biomodified iron oxide adsorbent (EDCSF) is obtained by the ethylene diamine tetraacetic acid (EDTA) modification. After the adsorbent is obtained, the biomaterial is characterized, and its performance of adsorbing heavy metals in water is tested as an adsorbent. In the experiment, the Fourier Transform Infrared Spectroscopy (FTIR) is used to verify that EDTA successfully modifies the surface of the CSF magnetic adsorbent. Through the morphology analysis and nitrogen adsorption–desorption test, EDTA cross-linked with the amino group of chitosan through carbodiimide can cause a decrease in the related physical indexes of the material. Thermogravimetric analysis (TGA) and hysteresis loop tests show that although the magnetism of CSF and EDCSF decreases, the solid–liquid separation is achieved in a relatively short time under the action of magnets. In the adsorption test, EDCSF shows an ideal adsorption performance for Cu(II), Cd(II), and Pb(II) in aqueous solution. With pH = 4.7 and at normal temperature, the maximum saturated adsorption capacity of EDCSF for Cu(II), Cd(II), and Pb(II) is 0.696 mmol/g, 0.586 mmol/g, and 0.562 mmol/g, respectively.

Preparation of novel CS/SiO 2 -EDTA nanocomposite from ash of rice straw pellets for enhanced removal efficiency of heavy metal ions in aqueous medium

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Facile Production of Highly Active Rice Straw Bioadsorbent to Remove Cu in Wastewater

Multifunctional Nanocomposites Fe 3 O 4 @sio 2 -EDTA for Pb(II) and Cu(II) Removal from Aqueous Solutions

Influence of Complexing Agent on the Removal of Pb(II) from Aqueous Solutions by Modified Mesoporous SiO2

Synthesis and characterization of chitosan Schiff base grafted with formaldehyde and aminoethanol: As an effective adsorbent for removal of Pb(II), Hg(II), and Cu(II) ions from aqueous media

A novel slag composite for the adsorption of heavy metals: Preparation, characterization and mechanisms

Novel Sustainable Adsorbents Prepared by Banana/Pomegranate Peels via EDTA Grafting for Effective Removal of Cd(II), Co(II), Mn(II), and Ni(II) from Sewage System

Synthesis of Biomass-based Adsorbent from Rice Husk Ash for Copper Ions Adsorption

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Preparation of Iron Oxide Adsorbent Modified by Chitosan Biomaterials and Its Adoption in the Adsorption of Heavy Metals

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Preparation of Sludge-Cyanobacteria Composite Carbon for Synergistically Enhanced Co-Removal of Cu(II) and Cr(VI)

Synergistic effects of aluminum doping and amino functionalization to enhance adsorption capacity of ultrathin-nanosheet-assembled calcium silicate hydrate architectures for effective removal of Pb 2+ and Cu 2+ from aqueous solution

Hierarchically Structured Calcium Silicate Hydrate-Based Nanocomposites Derived from Steel Slag for Highly Efficient Heavy Metal Removal from Wastewater

Research on the Adsorption Behavior of Heavy Metal Ions by Porous Material Prepared with Silicate Tailings

In Situ Synthesis of Carbon Nanotube–Steel Slag Composite for Pb(II) and Cu(II) Removal from Aqueous Solution

Ultra-purification of heavy metals and robustness of calcium silicate hydrate (C–S–H) nanocomposites

A novel chitosan-based hydrogel microspheres for efficient heavy metal-ion adsorption

Application of EDTA-functionalized Bamboo Activated Carbon (BAC) for Pb(II) and Cu(II) Removal from Aqueous Solutions

Synthesis and characterization of new composite sponge combining of metal-organic framework and chitosan for the elimination of Pb(II), Cu(II) and Cd(II) ions from aqueous solutions: Batch adsorption and optimization using Box-Behnken design