Abstract:Ethylenediamminetetraacetatonickel(II) (EDTA-Ni(II)) has emerged as a significant soil and groundwater contaminant due to the increasing agricultural and industrial activities, posing environmental challenges. This study focuses on addressing the reactivity of green rust (GR), which can be hindered by oxidation with oxygen, limiting its effectiveness in remediation processes. To overcome this limitation and enhance the adsorptive capacities, the combination of sulfate green rust (SO4-GR) with various Fe(II)/Fe(III) ratios with a high-surface-area adsorbent, MoS2, resulting in the formation of binary composites of green rust-deposited MoS2 (MSGs) were explored. The aim was to improve the removal efficiency of EDTA-Ni(II) from contaminated wastewater. To characterize the MSGs, a comprehensive analysis using XRD, SEM, TEM, FTIR, and X-ray absorption spectroscopy was performed. The surface areas of the MSGs were smaller than that of MoS2 but larger than that of the SO4-GRs, indicating a promising composite material. XANES spectra analysis revealed that both MSGs and SO4-GRs exhibited a mixture of ferrous and ferric ions, as evident from their spectral positioning between FeO and Fe2O3. The optimal pH for efficient removal of EDTA-Ni(II) was 3, which resulted in removal efficiencies of 45.6%, 47.3%, 46.0%, and 46.2% for MSG 1, MSG 2, MSG 3, and MSG 4 after 24 h, respectively. Reducing the initial concentration of EDTA-Ni(II) to 50 mg Ni(II)/L effectively doubled the removal efficiency. Notably, as EDTA-Ni(II) was removed, an increased leaching of iron was observed, leading to a total iron concentration exceeding 40 mg/L for the composites with higher Fe(II)/Fe(III) ratios. These findings underscore the potential of MSG as a promising material for degrading EDTA-Ni(II) in contaminated wastewater, offering a viable solution to mitigate the environmental impact of this emerging contaminant. This study contributes to the understanding of green rust reactivity and provides valuable insights for developing effective strategies to address the challenges associated with EDTA-Ni(II) contamination.

Efficient Removal of Organic and Inorganic Pollutants from Water Using Fe3O4@SiO2@CS@EDTA Nanocomposite: Optimization via Response Surface Methodology (RSM)

Accelerated Decoloration of Organic Dyes from Wastewater Using Ternary Metal/g-C3N4/ZnO Nanocomposites: An Investigation of Impact of g-C3N4 Concentration and Ni and Mn Doping

Removal of Neutral Red Dye via Electro-Fenton Process: A Response Surface Methodology Modeling

Optimization by Box–Behnken design for environmental contaminants removal using magnetic nanocomposite

Effectual adsorptive performance of metal-based engineered nanoparticles for surface water remediation: Systematic optimization by box-behnken design

A chemometric approach based on response surface methodology for optimization of antibiotic and organic dyes removal from water samples

Synthesis and characterization of green rust-deposited MoS2 composites for adsorptive removal of EDTA-chelated Ni(II) in wastewater

Multifunctional Nanocomposites Fe 3 O 4 @sio 2 -EDTA for Pb(II) and Cu(II) Removal from Aqueous Solutions

Synthesis of biodegradable sodium alginate-based carbon dot-nanomagnetic composite (SA-FOCD) for enhanced water remediation using ANN modelling, RSM optimization, and economic analysis

Structural selective regulation of Fe3O4@C composite as adsorbent for removing different organic pollutants

Optimizing catalytic performance: Reduction of organic dyes using synthesized Fe 3 O 4 @AC magnetic nano-catalyst

Experimental modelling studies on the removal of dyes and heavy metal ions using ZnFe2O4 nanoparticles

Decolorisation of textile wastewater using biosynthesised iron oxide nanomaterials and Optimisation by Response Surface Methodology

Green Synthesis of Nanochitosan/Bentonite/SnO2–ZnO Bionanocomposite for Removal of Heavy Metal Ions and Photocatalytic Degradation of Organic Dye

Enhanced Removal of Dye from Wastewater by Fenton Process Activated by Core-Shell NiCo2O4@FePc Catalyst

Chitosan@Carboxymethylcellulose/CuO-Co2O3 Nanoadsorbent as a Super Catalyst for the Removal of Water Pollutants

Tailored Design of MXene-like 2D MOF Derived Carbon/fe3o4 Fenton-like Catalysts Towards Effective Removal of Contaminants Via Size-Exclusion Effect

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Synthesis of a Novel Composite Sorbent Coated with Siderite Nanoparticles and its Application for Remediation of Water Contaminated with Congo Red Dye

High-efficient removal of organic dyes from model wastewater using Mg(OH)2-MnO2 nanocomposite: Synergistic effects of adsorption, precipitation, and photodegradation

Enhanced Removal of Pb(II), Paracetamol and Rhodamine B from Aqueous Solutions Using Engineered Low‐Cost Tea Waste‐Based Magnetic Nanocomposite