Abstract:N-doped porous carbon (N-PC) is considered as a promising candidate for electrochemical energy storage. However, the complicated multistep process is the biggest bottleneck. Here, a facile one-step strategy was employed to fabricate the N-doped porous carbon via the co-pyrolysis of urea and poly(acrylic acid- co -maleic acid) sodium salt (PAMS) without the protection of inert gas at 550 °C. When the mass ratio of urea to PAMS is 4:1, the microstructure and electrochemical properties of the as-prepared sample (N-4PC) are obviously improved compared with that of the direct carbonization of PAMS (PC). N-4PC presents salient peculiarities with much more mesopores, higher specific surface area of 181.5 m 2 g −1 far more than PC (23.6 m 2 g −1 ), and its nitrogen content is up to 10.61 at. %. In a three-electrode configuration using 6 M KOH, owing to the synergistic effect of pyridinic N, pyrrolic N and graphitic N atoms, N-4PC shows an outstanding specific capacity of 210 F g −1 far more than that of PC (93 F g −1 ) at 1 A g −1 , and a significant capacity retention rate of 79 % much higher than PC (47 %) at 20 A g −1 . Furthermore, the symmetric supercapacitor fabricated by N-4PC delivers an attractive specific capacitance of 140 F g −1 at 1 A g −1 , and 4.9 Wh kg −1 energy density when the power density is 265 W kg −1 in 6 M KOH. The equipment achieves superior cycle stability with capacity retention of 97 % after 7000 cycles at 1 A g −1 . Additionally, N-4PC also achieves great energy densities of 6.7 Wh kg −1 at the power density of 372.3 W kg −1 in 1 M H 2 SO 4 and 12.5 Wh kg −1 at the power density of 521.5 W kg −1 in 1 M Li 2 SO 4 . The fabricated nitrogen-doped porous carbon material has a great potential application prospect in energy storage equipment.

Preparation of nitrogen-doped porous carbon from pyrolysis of light bio-oil pretreated poplar powder and its electrochemical performance

Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor

A Novel Approach for Preparing In-Situ Nitrogen Doped Carbon Via Pyrolysis of Bean Pulp for Supercapacitors

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

In Situ, Nitrogen-Doped Porous Carbon Derived from Mixed Biomass as Ultra-High-Performance Supercapacitor

Pyrolysis of Biomass Impregnated With Ammonium Dihydrogen Phosphate for Polygeneration of Phenol and Supercapacitor Electrode Material

Nitrogen enriched high specific surface area biomass porous carbon: A promising electrode material for supercapacitors

Preparation of nitrogen and phosphorus Co-doped porous carbon with rapeseed meal as a precursor and its electrochemical properties

Ultrahigh yield of nitrogen doped porous carbon from biomass waste for supercapacitor

Hydrothermally synthesized N and S co-doped mesoporous carbon microspheres from poplar powder for supercapacitors with enhanced performance

Novel Nitrogen‐Doped Porous Carbon with High Surface Areas Prepared from Industrial Alkali Lignin for Supercapacitors

Low-cost pyrolysis of biomass-derived nitrogen-doped porous carbon: Chlorella vulgaris replaces melamine as a nitrogen source

One-step synthesis of polymer based N-doped porous carbon with enriched nitrogen content and its enhanced electrochemical properties in supercapacitors

One-step carbonization strategy of freeze-dried chitosan to prepare Nitrogen-Oxygen co-doped porous carbon supercapacitors with ultra-large specific surface area

A Novel Approach for Preparing Nitrogen-Doped Porous Nanocomposites for Supercapacitors

Preparation of nitrogen-rich porous carbon by microwave-assisted two-step co-pyrolysis of kapok wood and chlorella vulgaris

Construction and preparation of nitrogen-doped porous carbon material based on waste biomass for lithium-ion batteries

N-, P-, and Ni-Co-doped Porous Carbon from Poplar Powder and Graphene Oxide Composites as Electrode Materials for Supercapacitors

Mild and Efficient One-Step Synthesis of Nitrogen-Doped Multistage Porous Carbon for High-Performance Supercapacitors

Preparation of High-Performance Enteromorpha Prolifera–Based Porous Carbons by Nitrogen Modification and Their Electrochemical Performance

A combination of heteroatom doping engineering assisted by molten salt and KOH activation to obtain N and O co-doped biomass porous carbon for high performance supercapacitors