Abstract:Biomasses are promising precursors of porous carbons. However, the complexity in composition and microstructure of biomasses might result in poor quality reproducibility of biomass-derived porous carbons. It is essential to develop reliable approaches to prepare biomass-derived porous carbons. In this work, a nitrogen-doped porous carbon derived from cellulose microfibers of rice straw was prepared. The cellulose microfibers were first extracted from rice straw by alkali treatment. Then, a hydrochar was fabricated by hydrothermal treatment of the cellulose microfibers. Nitrogen-doped porous carbon was finally obtained by calcination under high temperature with K2CO3 and CO(NH2)2 as the activating agent and nitrogen dopant, respectively. The prepared carbon material has an ultrahigh specific surface area (∼2800 m2/g) and a moderate nitrogen doping (1.65 atom %). Consequently, rice-straw-derived porous carbon achieves a remarkable specific capacitance (380.1 F/g at 0.5 A/g) and a good rate capability (61.8% capacitance retention at 50 A/g). In addition, the porous carbon exhibits good cycling stability. The loss of capacitance is only 4.6% after 10 000 charge–discharge cycles. This study provides a robust method for the preparation of porous carbons from lignocellulosic biomasses.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00323?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00323</a>.SEM images of the carbonization product of raw rice straw (Figure S1), SEM images of the carbons prepared with different quantities of K2CO3 (Figure S2), rate capabilities of KRS-x and NKRS-y (Figure S3), CV curves and GCD profiles of RS and KRS (Figures S4 and S5), equivalent electric circuit diagram (Figure S6 and Table S1), comparison in capacitive performance between NKRS and NKRS-N (Figure S7), and comparison of various carbon materials in specific capacitance (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00323/suppl_file/ef1c00323_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of nitrogen and phosphorus Co-doped porous carbon with rapeseed meal as a precursor and its electrochemical properties

Preparation of biomass-based N, P, and S co-doped porous carbon with high mesoporosity based on the synergistic effect of NaOH/thiourea and melamine phosphate and its application in high performance supercapacitors

Synthesis of P, S, N, Triple‐Doped Porous Carbon from Steam Explosion Pretreated Peanut Shell as Electrode Material Applied on Supercapacitor

Nitrogen and Phosphorus Co-doped Porous Carbon for High-Performance Supercapacitors

Nitrogen/Phosphorus Co-Doped Porous Carbon Materials For Supercapacitor Electrodes

A Novel Approach for Preparing Nitrogen-Doped Porous Nanocomposites for Supercapacitors

Porous Carbon Electrode from Starch Soluble for Realizing High‐Performance Supercapacitor

Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor

Nitrogen, Phosphorus Co-doped Carbon Obtained from Amino Acid Based Resin Xerogel as Efficient Electrode for Supercapacitor

Multi-heteroatom-doped porous carbon with high surface adsorption energy of potassium derived from biomass waste for high-performance supercapacitors

N-doped layered porous carbon electrodes with high mass loadings for high-performance supercapacitors

Engineering of N, P co-doped hierarchical porous carbon from sugarcane bagasse for high-performance supercapacitors and sodium ion batteries

Polyatomic self-doping millet-derived porous carbon for supercapacitor

A Simple Method to Fabricate N-doped Hierarchical Porous Carbon for Supercapacitors

Nitrogen and Phosphorus Co-doped Porous Carbon: Dopant, Synthesis, Performance Enhancement Mechanism and Versatile Applications

Nitrogen, Sulfur Co-Doped Hierarchically Porous Carbon from Rape Pollen As High-Performance Supercapacitor Electrode

Nitrogen-Doped Porous Carbons Derived from Peanut Shells as Efficient Electrodes for High-Performance Supercapacitors

N-O-P co-doped porous carbon aerogel derived from low-cost biomass as electrode material for high-performance supercapacitors

Nitrogen-Doped Porous Carbon Derived from Cellulose Microfibers of Rice Straw for High-Performance Electrodes of Supercapacitors

Deep insight into the pore size distribution of N-doped porous carbon materials on electrochemical energy storage and CO2 sorption

Boosting supercapacitor performance through the facile synthesis of boron and nitrogen co-doped resin-derived carbon electrode material