Abstract:The first step towards high critical currents in Bi-2212 wires was the comprehension that the supercurrent is blocked over long lengths by filament-diameter bubbles grown during the melt stage, which cause expansion of the wire diameter and dedensification of the superconducting filaments. Whereas the previous successful approach to reduce the problem of voids related to bubbles was based on the application of a high overpressure during the heat treatment, we fabricated Bi-2212 wires by applying a new concept of suitably alternating groove-rolling and drawing techniques with the aim of densifying the phase already during the working procedure prior to the heat treatment. We here for the first time were able to reach in wires reacted with closed ends - i.e. with gas trapped in the wire as it happens in long-length wires - the very same values of critical current shown in short wires reacted with open ends. This is the irrefutable evidence that, only by acting on the deformation technique, we were able to raise the critical current by properly densifying the superconducting powder inside the filaments already before the melt stage. Whole-conductor current densities in our long length simulation wires already reach 400 A/mm2 at 4.2 K and 5 T, which can be still easily increased through architecture optimization. The actual breakthrough is that the densification is optimized without further complex treatments through a technique which can be straightforwardly applied to long-lengths wires.

Recent Development and Status of Ex-Situ PIT MgB 2 Wires at ASG Superconductors

Electrical and mechanical limits of ex-situ MgB2 wires for cabling.

Fabrication and Properties of Multifilamentary MgB2 Wires by In-Situ Powder-in-tube Process

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

High performance new MgB2 superconducting hollow wires

Study of the MgB2 grain size role in ex-situ multifilamentary wires with thin filaments

Superconducting properties of the powder-in-tube Cu-Mg-B and Ag-Mg-B wires

Development of high-performance iron-based superconducting wires and tapes

The Preparation of MgB 2 Conductors for Magnet Application of SMES in WST

Dc Superconducting Cable Using Mgb2 Wires

Large transport critical currents in unsintered MgB2 superconducting tapes

Enhanced critical current density at high magnetic fields in MgB2 wire processed by in-situ spark plasma sintering

Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires

New concept for the development of Bi-2212 wires for high field applications

FABRICATION AND CHARACTERIZATION OF MgB_2/Fe BY EX-SITU PIT METHOD

High transport critical currents in dense, metal-clad superconductor wires of MgB2

Improving superconducting properties of 100 m class MgB 2 wire with 18+1 filaments produced via internal Mg diffusion process

Progress in high temperature superconductor coated conductors and their applications

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

Properties of superconducting MgB_2 wires: "in-situ" versus "ex-situ" reaction technique

Possibilities of MgB2/Cu Wires Fabricated by the in-situ Reaction Technique