Abstract:Sb2Se3 is an emerging and promising light-absorbing material with superior photovoltaic properties. However, the specific one-dimensional structure of Sb2Se3 limits the doping density, preventing a high built-in potential. Moreover, in the superstrate devices the back contact is often non-ohmic. In this work, we have successfully applied tungsten oxide (WO3-x) as a hole-transport layer in superstrate n-i-p Sb2Se3 solar cells. It is found that an interfacial dipole is formed at Sb2Se3/WO3-x interface via Sb–W bonds, which reduces the barrier for hole extraction. Meantime, gap states are present at a suitable energy level to serve as intermediate states for hole-transport from the Sb2Se3 absorber to the metal anode. In addition, the introduction of WO3-x can suppress carrier recombination at the back interface, enhance the built-in potential, and improve the spectral response in the long-wavelength region. Consequently, the superstrate devices with the incorporated WO3-x layer achieve a champion efficiency of 7.10% due to the enhancement of all device parameters. Furthermore, the all-inorganic devices with WO3-x hole-transport layer exhibit excellent air stability and thermal stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10629?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10629</a>.XPS, SEM of WO3-x films; Tauc plots for band gap calculation of WO3-x film; integrated Jsc; current density–voltage (J–V) curves measured in both forward and reverse scan directions; dV/dJ with the fit used to determine R; cross-sectional SEM and AFM of Sb2Se3 films covered with WO3-x layers; the Voc, Jsc, and FF evolution (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10629/suppl_file/am0c10629_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrafast Electron and Hole Transfer and Efficient Charge Separation in a Sb 2 Se 3 /CdS Thin Film p-n Heterojunction

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

In Situ Investigation of Interfacial Properties of Sb2Se3 Heterojunctions

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Enabling Efficient Charge Separation for Optoelectronic Conversion Via an Energy-Dependent Z-Scheme N-Semiconductor-metal-p-semiconductor Schottky Heterojunction.

Sb 2 Se 3 /CsPbBrI 2 All-Inorganic p–n Heterojunction Solar Cells

Ultrafast Carrier Kinetics at Surface and Interface of Sb2Se3 Film by Transient Reflectance

Concurrent investigation of antimony chalcogenide (Sb2Se3 and Sb2S3)-based solar cells with a potential WS2 electron transport layer

Integration of Semiconducting Sulfides for Full-Spectrum Solar Energy Absorption and Efficient Charge Separation.

Sb2S3/Sb2Se3 heterojunction for high-performance photodetection and hydrogen production

Heterojunction Lithiation Engineering and Diffusion-Induced Defects Passivation for Highly Efficient Sb2(S,Se)3 Solar Cells

Dual back interface engineering optimized charge carrier dynamics in Sb 2 (S,Se) 3 photocathodes for efficient solar hydrogen production

In-situ construction of novel Sb2(S,Se)3/CdSe S-scheme heterojunction with enhanced photoelectrochemical performance

Suppressing the Trapping Process by Interfacial Charge Extraction in Antimony Selenide Heterojunctions

Suppressing Buried Interface Nonradiative Recombination Losses Towards High‐efficiency Antimony Triselenide Solar Cells

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Back Contact Interfacial Modification in Highly-Efficient All-Inorganic Planar n-i-p Sb 2 Se 3 Solar Cells

Space-Charging Interfacial Layer by Illumination for Efficient Sb 2 S 3 Bulk-Heterojunction Solar Cells with High Open-Circuit Voltage

Heterostructured CdS Buffer Layer for Sb2Se3 Thin Film Solar Cell

Designing Atomic Interface in Sb2S3/CdS Heterojunction for Efficient Solar Water Splitting