Abstract:B4C ceramics were strengthened by introducing the hard second–phase particles TiB2 and SiC, and the effects of TiB2 and SiC contents on the microstructure and properties of the composites were investigated. B4C–TiB2 binary composites with TiB2 contents of 10, 20, 30, and 40 vol% were prepared by hot pressing. The microstructure, mechanical properties, and electrical properties of the composites with different TiB2 contents were investigated and compared. The results showed that the B4C–30 vol%TiB2 composite obtained the best comprehensive properties, with a relative density, hardness, bending strength, fracture toughness, and conductivity of 97.9 %, 29.5 GPa, 590 MPa, 6.41 MPa m1/2, and 7.6 × 104 S/m. The compressive stress generated on B4C, crack deflection induced by TiB2, and conductive network formed by TiB2 are of great significance in the context of the properties of the B4C–TiB2 composites. In addition, B4C–TiB2–SiC ternary composites with SiC contents of 0, 10, and 20 vol% were also fabricated by hot pressing. The effect of SiC content on the microstructure and mechanical properties, and the effect of SiC on the antioxidant properties of the composites were investigated. The results showed that the B4C–30 vol%TiB2–10 vol%SiC composite had the best comprehensive properties, with a relative density, hardness, flexural strength, fracture toughness, and residual flexural strength (1600 ℃) of 98.8 %, 29.5 GPa, 621 MPa, 6.80 MPa m1/2, and 465 MPa. The inhibition of the growth of SiC to other grains, removal of oxide impurities, and repair of damage by SiC oxidation products play an important role in the performance of the B4C–TiB2–SiC composites.

Role of co-addition of BN and SiC on microstructure of TiB2-based composites densified by SPS method

Densification behavior and microstructure development in TiB2 ceramics doped with h-BN

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics

Microstructural characterization of TiB2–SiC–BN ceramics prepared by hot pressing

A Novel TiB2–SiC Composite Doped with Diamond Nanoparticles: Densification, Microstructure, and Thermal Properties

Microstructures and mechanical properties of TiB2 composite ceramics with co-addition of Ti and TiC fabricated by SPS

Spark plasma sintering of TiN ceramics codoped with SiC and CNT

Effect of B2O3 Addition on Low-temperature Sintering Behavior and Properties of SiC/h-BN Multiphase Ceramics

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Densification, Microstructure, and Wear Properties of TiB2-TiC-GNP and TiB2-TiC-BN Composites

Preparation of TiB2–SiC composites toughened with interlocking microstructure by self-assembled TiB2 plates

Fabrication of (Zr,Ti)B2-ZrN-BN composites through reactive spark plasma sintering of ZrB2 and TiN

Effects of Ti on the Microstructural Evolution and Mechanical Property of the SiBCN-Ti Composite Ceramics

Quantitative analysis and comparison on densification kinetics and grain growth mechanisms using reactively and directly densified TiB 2 -SiC- h BN ceramics

The Effect of Tio2 and Zro2 Additives on the Density, Microstructure, and Mechanical Properties of Pressureless Sintered Sic-B4c

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Microstructure and properties of hot pressed TiB2 and SiC reinforced B4C–based composites

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Pulsed electric current sintering of TiB2-based ceramics using nitride additives

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering