Abstract:As the excavation depth of underground engineering increases, the influence of in situ stress on the blasting effect cannot be ignored. The large number of fractures in the natural rock mass, coupled with the in situ stress, significantly impacts the propagation of stress waves. In this research, a synthetic rock mass approach based on the UDEC grain-based model was employed to investigate crack propagation and coalescence during double-borehole blasting with a variety of fracture networks and in situ stress conditions. The effects of the buried depth, fracture geometric parameters (i.e., the length and intensity), blast parameters (i.e., the explosive charge and borehole spacing), and borehole layouts on blasting-induced rock fracturing were examined. The simulation results showed that for a low-density fracture network dominated by short fractures, the pre-existing fractures have little effect on the propagation of blasting-induced cracks. However, as the length or density of fractures increases, pre-existing fractures could restrain the blasting-induced radial crack propagation and enhance the rock fragmentation between the borehole and the pre-existing fracture. This effect gradually disappeared as the in situ stress increased. In addition, the mismatch between the centreline of double boreholes and the direction of high in situ stress could also affect the coalescence of cracks, especially in high-density fracture networks. Finally, the applicability of empty holes to improve the crack coalescence between boreholes in fractured rock was discussed. This study should be beneficial in understanding the blasting behaviour of deep fractured rocks.Article HighlightsThe synthetic rock mass method was used to examine the crack coalescence process of double-borehole blasting.The effects of the buried depth, fracture geometric parameters, blast parameters, and borehole layouts on blasting-induced rock fractures were investigated.The applicability of empty holes to improve the crack coalescence between boreholes in fractured rock was discussed.

Coupled GIMP and CPDI material point method in modelling blast-induced three-dimensional rock fracture

Numerical Study on the Fracturing of Deep Rock Masses by Blasting Based on the Material Point Method

Application of a synthetic rock mass approach to the simulation of blasting-induced crack propagation and coalescence in deep fractured rock

Numerical modelling of blast-induced crack propagation in pre-fractured rock

Investigations into the Rock Dynamic Response under Blasting Load by an Improved DDA Approach

Understanding the effect of differential stress and fracture geometry on blast-induced damage in crystalline rocks: a numerical approach

Rate-dependent constitutive modelling blasting crack initiation and propagation in rock masses

Explosion propagation and characteristics of rock damage in decoupled charge blasting based on computed tomography scanning

Analysis of Damages in Layered Surrounding Rocks Induced by Blasting During Tunnel Construction

Study of rock damage characteristics in decoupled slit charge blasting based on computer tomography scanning

Numerical investigation of blast-induced fractures in granite: insights from a hybrid LS-DYNA and UDEC grain-based discrete element method

Numerical investigation of blast-induced rock fragmentation

Numerical simulation of blasting behavior of rock mass with cavity under high in-situ stress

Modeling study of cumulative damage effects and safety criterion of surrounding rock under multiple full-face blasting of a large cross-section tunnel

Fracture mechanics analysis of rock containing collinear cracks under dynamic blasting loads

Study on the Damage Effects of Explosive Media Based on FEM-DEM Local Adaptive Transformation

Damage evolution law of multi-hole blasting igneous rock and quantitative evaluation model of damage degree based on fractal theory and clustering algorithm

Finite element analyses of constitutive models performance in the simulation of blast-induced rock cracks

Study on the crack propagation behaviour of eccentric uncoupled blasting in a deep-level rock mass

3D Damage and Failure Patterns in Rock due to Blasting at Different Open Joints Dig Angles

Study on blast‐induced cracks penetration characteristics of double water jet slotted boreholes