Abstract:Quantitative evaluations of blasting damage evolutions of concrete structures are the premise of improving the design codes of concrete blasting engineering. However, traditional numerical methods have some limitations in dealing with the large deformation and discontinuity problems during concrete blasting. In view of this, the improved SPH momentum equation considering blasting load is derived. The "birth and death coefficient" χ is defined, and the traditional SPH smoothing kernel function is then improved, thus realizing the simulations of dynamic blasting damage evolutions under the SPH framework. The methods of determining the concrete meso-structures as well as distinguishing different materials are proposed, which can realize the generations of SPH particles such as aggregates, interfacial transition zones and pores. Firstly, four typical numerical examples are simulated: (1) blasting damage evolution model with one blast hole and one 45° prefabricated fissure; (2) blasting damage evolution model with one blast hole and three parallel prefabricated fissures; (3) blasting damage evolution model with one blast hole, one vertical prefabricated fissure and one horizontal prefabricated fissure; and (4) blasting damage evolution model with two blast holes, two empty holes and two prefabricated fissures. The numerical results are compared with previous experimental results to verify the correctness of the improved method. Then, the concrete mesoscopic blasting damage models are established, and the blast damage evolution processes under different concrete mesoscopic structure properties as well as different dynamic blasting parameters are simulated, and results show that: (1) The blasting cracks are limited around the blast hole when the aggregate content is larger, while when the aggregate content is smaller, the blasting cracks expand to the model boundary by propagating around the aggregates. The increase in the pore content leads to a different crack propagation mode: combinations of crack propagating around the aggregates and connecting the pores. (2) The increase of peak stress wave value and blast stress loading rate leads to the increase in the damage degree around the blast hole, but decrease in the damage degree of the whole model. (3) The damage counts increase rapidly in the initial stage of blasting, but maintain a low level in the later stage when the aggregate content is larger, while it is the opposite when the aggregate content is smaller. The increase in the pore content leads to the decrease in the model damage degree. (4) The dynamic blasting parameters donate less effects on concrete damage counts, and the blasting damage counts decrease with the increase in the peak stress wave value and the loading rate.

Study on the Damage Effects of Explosive Media Based on FEM-DEM Local Adaptive Transformation

Anisotropic Dynamic Damage and Fragmentation of Rock Materials under Explosive Loading

Understanding the effect of differential stress and fracture geometry on blast-induced damage in crystalline rocks: a numerical approach

Damage mechanism and fracture evolution of rock containing defects with LCEM-GFEM method under explosive load

Determining Digital Representation and Representative Elementary Volume Size of Broken Rock Mass Using the Discrete Fracture Network–Discrete Element Method Coupling Technique

A total Lagrange meshless method for modeling the concrete damage evolutions under blast loading

Numerical modelling of blast-induced crack propagation in pre-fractured rock

An indirect method for calculation of rock dynamic tensile strength and fracture energy using blasting experiments

Study of rock damage characteristics in decoupled slit charge blasting based on computer tomography scanning

Peridynamics simulations of the damage of reinforced concrete structures under radial blasting

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing

Numerical simulation of the damage process of rock containing cracks by impacts of steel-particle water jet

Numerical simulation of column charge explosive in rock masses with particle flow code

Numerical Investigation on Crack Formation and Penetration Mechanism between Adjacent Blastholes

Coupled GIMP and CPDI material point method in modelling blast-induced three-dimensional rock fracture

Study on the crack propagation behaviour of eccentric uncoupled blasting in a deep-level rock mass

Grain-Based Discrete Element Method (GB-DEM) Modelling of Multi-scale Fracturing in Rocks Under Dynamic Loading

Consequences Assessment of Explosions in Pipes Using Coupled FEM-SPH Method

Fractal damage and crack propagation of PMMA in multiple slit charge blasting

Numerical simulation of the effect of water-decoupling charge blasting on reservoir permeability enhancement

Numerical Study on the Fracturing of Deep Rock Masses by Blasting Based on the Material Point Method