Abstract:In practical smooth blasting, rock fracturing is influenced by in-situ stress, which frequently leads to underbreak/overbreak and excavation damaged zone and consequently poses a serious threat to the safety of the excavated structure. This study systematically investigates the behaviour and mechanism of rock cracking under coupled initial stress and smooth blast utilizing experimental, theoretical, and numerical methods. Model experiments involving three-hole smooth blasting on 200 × 200 × 50 mm granite specimens are conducted under various static stresses. The resulting fracturing patterns are identified using the digital image correlation technique. The model testing examines rock cracking behaviours, fractal characteristics of rock fractures, and underbreak/overbreak. Experimental results indicate that the extents of rock fracturing and the fractal dimension in both the excavation and reserved zones show an overall decreasing trend as the static stress increases. Meanwhile, the area and depth of underbreak/overbreak also present a decreasing trend, suggesting that static stress is beneficial to the performance of smooth blasting. Then, the variations of crack patterns in model tests are theoretically analysed based on the transmission and superimposition of detonation stress waves combined with the static stress distribution near perimeter holes. Theoretical results emphasize the crucial role of the second hole and indicate no evidence of the third hole influencing the generation of connection fractures. The initial stress induces hoop tensile stress concentration on borehole-wall and generates the smallest hoop compression stress distributed vertically to the excavation line, which controls the initiation and extension of fractures in smooth blasting along the connection line of boreholes. Subsequently, the fracture evolution under coupled initial stress and smooth blast is numerically modelled using LS-DYNA. The numerical results vividly illustrate the necessity of a small burden to efficiently fragment the rock within the excavation zone when smooth blasting is applied to rock excavation under high in-situ stress.

Study of rock damage characteristics in decoupled slit charge blasting based on computer tomography scanning

Explosion propagation and characteristics of rock damage in decoupled charge blasting based on computed tomography scanning

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Study on the failure behavior and stress evolution characteristics of glauconite under blasting action

Fractal damage and crack propagation in decoupled charge blasting

Experimental Investigation of Decoupled Charge Effect on Rock Fragmentation by Blasting

Damage evaluation of rock blasting based on multi-fractal study

Rock fracture mechanism of air-deck charge blasting considering the action effect of blasting gas

Damage Analysis of Concrete Structure under Multidirectional Shaped Charge Blasting Using Model Experiment and Ultrasonic Testing

Application Study on Blasting with Linear Cumulative Cutting Charge in Rock

Study on the crack propagation behaviour of eccentric uncoupled blasting in a deep-level rock mass

Study on the influence of slit pipe wall thickness on the rock breaking effect of slit charge explosion

Understanding the effect of differential stress and fracture geometry on blast-induced damage in crystalline rocks: a numerical approach

STUDY ON THE DIRECTIONAL FRACTURE CONTROLLED BLASTING WITH SLIT-CHARGE IN ROCK

Study on rock fracturing in smooth blasting under initial stress

Study on crack propagation mechanism and charge structure optimization of tunnel shaped charge hydraulic blasting

Numerical study on the behavior of blasting in deep rock masses

Numerical Study on an Innovative Shaped Charge Approach of Rock Blasting and the Timing Sequence Effect in Microsecond Magnitude

Fractal damage and crack propagation of PMMA in multiple slit charge blasting

Effect of confining pressure on damage accumulation of rock under repeated blast loading

Research on the crack formation mechanism of shaped charge blasting and the new dual-shaped charge blasting technology