Abstract:As the excavation depth of underground engineering increases, the influence of in situ stress on the blasting effect cannot be ignored. The large number of fractures in the natural rock mass, coupled with the in situ stress, significantly impacts the propagation of stress waves. In this research, a synthetic rock mass approach based on the UDEC grain-based model was employed to investigate crack propagation and coalescence during double-borehole blasting with a variety of fracture networks and in situ stress conditions. The effects of the buried depth, fracture geometric parameters (i.e., the length and intensity), blast parameters (i.e., the explosive charge and borehole spacing), and borehole layouts on blasting-induced rock fracturing were examined. The simulation results showed that for a low-density fracture network dominated by short fractures, the pre-existing fractures have little effect on the propagation of blasting-induced cracks. However, as the length or density of fractures increases, pre-existing fractures could restrain the blasting-induced radial crack propagation and enhance the rock fragmentation between the borehole and the pre-existing fracture. This effect gradually disappeared as the in situ stress increased. In addition, the mismatch between the centreline of double boreholes and the direction of high in situ stress could also affect the coalescence of cracks, especially in high-density fracture networks. Finally, the applicability of empty holes to improve the crack coalescence between boreholes in fractured rock was discussed. This study should be beneficial in understanding the blasting behaviour of deep fractured rocks.Article HighlightsThe synthetic rock mass method was used to examine the crack coalescence process of double-borehole blasting.The effects of the buried depth, fracture geometric parameters, blast parameters, and borehole layouts on blasting-induced rock fractures were investigated.The applicability of empty holes to improve the crack coalescence between boreholes in fractured rock was discussed.

Numerical investigation of blast-induced fractures in granite: insights from a hybrid LS-DYNA and UDEC grain-based discrete element method

Understanding the effect of differential stress and fracture geometry on blast-induced damage in crystalline rocks: a numerical approach

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Study on the Effect of Micro-Geometric Heterogeneity on Mechanical Properties of Brittle Rock Using a Grain-Based Discrete Element Method Coupling with the Cohesive Zone Model

Investigation of Damage Evolution in Heterogeneous Rock Based on the Grain-Based Finite-Discrete Element Model

Numerical Modelling of Water-Coupling Cutting Blasting in Granite Quarry

Numerical investigation of the effects of the micro-parameters of the transgranular contact on the mechanical response of granite

Numerical modelling of blast-induced crack propagation in pre-fractured rock

Application of a synthetic rock mass approach to the simulation of blasting-induced crack propagation and coalescence in deep fractured rock

Rate-dependent constitutive modelling blasting crack initiation and propagation in rock masses

Numerical investigation of blast-induced rock fragmentation

Mode I fracture behavior of heterogeneous granite: Insights from grain-based FDEM modelling

Numerical simulations of rock blasting damage based on laboratory-scale experiments

Investigation of the dynamic behavior and fracturing mechanism of granite

Finite element analyses of constitutive models performance in the simulation of blast-induced rock cracks

Experimental and numerical investigations on the fracture surface roughness of crack branching of granite

Study on the characteristics of granite rock impact crack based on grain-based model

Experimental and numerical studies of the impact breakage of granite with high ejection velocities

Numerical Investigation on Determining the Optimal Heterogeneity Index and Compressive–tensile Ratio of Granite Using a Damage-Based Numerical Manifold Method

Experimental and Numerical Study on Mechanical Behaviors of Granite Subjected to Impact Shear Force

Dynamic Fracture Mechanism from a Pre-Existing Flaw in Granite: Insights from Grain-Based Modelling