Abstract:The roughness of the fracture surface directly affects the strength, deformation, and permeability of the surrounding rock in deep underground engineering. Understanding the effect of high temperature and thermal cycle on the fracture surface roughness plays an important role in estimating the damage degree and stability of deep rock mass. In this paper, the variations of fracture surface roughness of granite after different heating and thermal cycles were investigated using the joint roughness coefficient method (JRC), three-dimensional (3D) roughness parameters, and fractal dimension (D), and the mechanism of damage and deterioration of granite were revealed. The experimental results show an increase in the roughness of the granite fracture surface as temperature and cycle number were incremented. The variations of JRC, height parameter, inclination parameter and area parameter with the temperature conformed to the Boltzmann's functional distribution, while the D decreased linearly as the temperature increased. Besides, the anisotropy index (Ip) of the granite fracture surface increased as the temperature increased, and the larger parameter values of roughness characterization at different temperatures were attained mainly in directions of 20°-40°, 60°-100° and 140°-160°. The fracture aperture of granite after fracture followed the Gauss distribution and the average aperture increased with increasing temperature, which increased from 0.665 mm at 25 °C to 1.058 mm at 800 °C. High temperature caused an uneven thermal expansion, water evaporation, and oxidation of minerals within the granite, which promoted the growth and expansion of microfractures, and reduced interparticle bonding strength. In particular, the damage was exacerbated by the expansion and cracking of the quartz phase transition after T > 500 °C. Thermal cycles contributed to the accumulation of this damage and further weakened the interparticle bonding forces, resulting in a significant increase in the roughness, anisotropy, and aperture of the fracture surface after five cycles.

Experimental and numerical investigations on the fracture surface roughness of crack branching of granite

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

An energy-based model with non-symmetrical branch fractures of different roughness

Experimental and numerical investigation on meso -fracture behavior of Beishan granite subjected to grain size heterogeneity

Experimental and numerical studies on dynamic fracturing behavior of roughly jointed rock

Investigation of the dynamic behavior and fracturing mechanism of granite

Mode I fracture behavior of heterogeneous granite: Insights from grain-based FDEM modelling

Quantitative investigation of crack propagation and fracture mechanism of fissured granite from the mesoscopic perspective

Numerical investigation of the effects of the micro-parameters of the transgranular contact on the mechanical response of granite

Experimental Investigation on the Effect of Grain Size of Granitic Rocks on the Fracture Roughness and Toughness

The Role of Fracture Surface Roughness in Macroscopic Fluid Flow and Heat Transfer in Fractured Rocks

Numerical investigation of blast-induced fractures in granite: insights from a hybrid LS-DYNA and UDEC grain-based discrete element method

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Dynamic Mode II Fracture Characteristics and Shear Surface Morphology of Granite Under Triaxial Confining Pressure

Numerical investigation of the effect of grain size-to-particle size ratio on the dynamic fracture toughness of granite by using PFC3D-GBM

The Influence of Mechanical Heterogeneity of Grain Boundary on Mechanical and Microcracking Behavior of Granite Under Mode I Loading Using a Grain-Based Model

Numerical simulations on the structural heterogeneity and fracture bias effect of three-point bending specimen

Effects of high temperature and thermal cycles on fracture surface's roughness of granite: An insight on 3D morphology

Experimental Investigation of Mechanical and Fracture Behavior of Parallel Double Flawed Granite Material under Impact with Digital Image Correlation

Seepage Analysis of Orthogonal Shear Cracks in Granite Based on Fractal Theory

Rock damage and fracture characteristics considering the interaction between holes and joints