Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Study on the spatial and temporal distribution of the bed density in an air dense medium fluidized bed (ADMFB) based on the electrical capacitance tomography (ECT) measurement system

Measurement and modeling of axial distribution of adsorbent particles in expanded bed: taking into account the particle density difference

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

NONUNIFORM HYDRODYNAMICS AND AXIAL DISPERSION BEHAVIORS IN EXPANDED BEDS

Variation of the Axial Dispersion along the Bed Height for Adsorbents with a Density Difference and a Log-Normal Size Distribution in an Expanded Bed

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Variation of the Local Effective Axial Dispersion Coefficient with Bed Height in Expanded Beds

Simultaneous Measurement of Electrostatic Charge and Its Effect on Particle Motions by Electrostatic Sensors Array in Gas-Solid Fluidized Beds

Study on Voidage Measurement of Gas-solid Fluidized Bed by Using Electrical Capacitance Tomography

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Experimental Investigation of Electrostatic Effect on Particle Motions in Gas-Solid Fluidized Beds

Online Measurement of Particle Charge Density in A Gas-Solid Bubbling Fluidized Bed Through Electrostatic and Pressure Sensing

Experimental study on gas–solids flows in a circulating fluidised bed using electrical capacitance tomography

Experimental characterizing the residence time distribution of large spherical objects immersed in a fluidized bed

Effect of Bed Material Particle Size Distribution on Lateral Dispersion in a CFB Dense Zone Using CPFD Method

Investigation of flow characteristics in a rectangular spouted fluidized bed using electrical capacitance volume tomography

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Combing mobile electrical capacitance tomography with Fourier neural operator for 3D fluidized beds measurement

Coarse-grained CFD-DEM simulation to determine the multiscale characteristics of the air dense medium fluidized bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed