Abstract:The design of highly selective yet robust anion exchange membranes remains a challenge. Here, the authors prepare a stable polymer membrane composed of terphenyl isomers, demonstrate roll-to-roll manufacturing, and assess its properties in redox flow batteries, water electrolyzers and fuel cells. The lack of high-performance and substantial supply of anion-exchange membranes is a major obstacle to future deployment of relevant electrochemical energy devices. Here, we select two isomers (m-terphenyl and p-terphenyl) and balance their ratio to prepare anion-exchange membranes with well-connected and uniformly-distributed ultramicropores based on robust chemical structures. The anion-exchange membranes display high ion-conducting, excellent barrier properties, and stability exceeding 8000 h at 80 degrees C in alkali. The assembled anion-exchange membranes present a desirable combination of performance and durability in several electrochemical energy storage devices: neutral aqueous organic redox flow batteries (energy efficiency of 77.2% at 100 mA cm(-2), with negligible permeation of redox-active molecules over 1100 h), water electrolysis (current density of 5.4 A cm(-2) at 1.8 V, 90 degrees C, with durability over 3000 h), and fuel cells (power density of 1.61 W cm(-2) under a catalyst loading of 0.2 mg cm(-2), with open-circuit voltage durability test over 1000 h). As a demonstration of upscaled production, the anion-exchange membranes achieve roll-to-roll manufacturing with a width greater than 1000 mm.

Embedded order boosts battery membranes

Polymeric membranes with aligned zeolite nanosheets for sustainable energy storage

A Selectively Permeable Membrane For Enhancing Cyclability Of Organic Sodium-Ion Batteries

Multifactorial engineering of biomimetic membranes for batteries with multiple high-performance parameters

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Highly Ion-Conductive Anion Exchange Membranes with Superior Mechanical Properties Based on Polymeric Ionic Liquid Filled Functionalized Bacterial Cellulose for Alkaline Fuel Cells

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of Beta-Li3ps4 Via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Porous Carbon Globules with Moss-Like Surfaces from Semi-Biomass Interpenetrating Polymer Network for Efficient Charge Storage

High-performance spiro-branched polymeric membranes for sustainability applications

Controlled phase separation of regenerated cellulose with super-engineering thermoplastics into porous membranes with hierarchical morphology as high-performance separators for lithium-ion batteries

Carbonized Polymer Dots Assemble in Proton-Conducting Channels to Enhance the Conductivity and Selectivity Simultaneously for High-Performance Fuel Cells

Ordered mesoporous nanofibers mimicking vascular bundles for lithium metal batteries

Membrane with horizontally rigid zeolite nanosheet arrays against zinc dendrites in zinc-based flow battery

Ultra-high Li+ transfer efficiency of in situ grown membrane for high-performance batteries

Battery Electrodes: Self‐Wound Composite Nanomembranes As Electrode Materials for Lithium Ion Batteries (adv. Mater. 41/2010)

Enhancing Li+ transport via nano-porous cellulose fiber membrane with anion-sorbent for high-performance lithium-ion batteries

Molecular engineering of renewable cellulose biopolymers for solid-state battery electrolytes

Boosting ion conduction in polymer blends by tailoring polymer phase separation

Author Correction: Upscaled Production of an Ultramicroporous Anion-Exchange Membrane Enables Long-Term Operation in Electrochemical Energy Devices

Composite Membrane Containing Titania Nanofibers for Battery Separators Used in Lithium-Ion Batteries

Influence of chemical microstructure of single-ion polymeric electrolyte membranes on performance of lithium-ion batteries