Abstract:Conventional separators applied in lithium batteries face limitations like low porosity, poor electrolyte wettability, lower cation selectivity, and thermal instability, which impact battery performance and safety characteristics. Besides the challenge in separator design, transition metal ion migration from positive electrodes during cycling greatly accelerates capacity fading because of unrestricted diffusion of transition metal cation across the separator. This study explores an innovative strategy for the separator design by incorporating MXene (spraying MXene solution on both sides of the separator), a two-dimensional material, into electrospun Polyacrylonitrile/Polyetherimide membranes with the function of cation selection. Li + can be accelerated, and its transference number increases along with the anion limitation in the MXene layer. Ni, Co, and Mn ion dissolution from the positive electrode is inhibited due to the cation selectivity of the MXene layer. Leveraging electrospinning advantages, the resultant membranes exhibit high porosity, excellent liquid absorption, mechanical strength, and superior thermal properties. Benefiting from MXene's layered structure and excellent adsorption ability, the membrane significantly inhibits the dissolution of transition metal ions while enabling smooth lithium deposition due to its cation selectivity. Eventually, the Li||NMC811 batteries deliver outstanding cyclic performance (91.3% capacity retention after 200 cycles) and robust lithium dendrite suppression (800 hours of stable cycling). Moreover, the MXene-modified membrane demonstrates exceptional electrolyte wettability, significantly improving ionic transference number (0.67) and conductivity (1.6 mS cm -1 ). Modification of membrane surfaces with MXene offers insights into addressing transition metal ion migration from the positive electrode material perspective, providing a promising avenue for high-performance LIBs.

Battery Electrodes: Self‐Wound Composite Nanomembranes As Electrode Materials for Lithium Ion Batteries (adv. Mater. 41/2010)

Self-wound composite nanomembranes as electrode materials for lithium ion batteries.

Engineering Wavy‐Nanostructured Anode Interphases with Fast Ion Transfer Kinetics: Toward Practical Li‐Metal Full Batteries

Composite Lithium Electrode with Mesoscale Skeleton Via Simple Mechanical Deformation.

A robust crosslinked polysiloxane-embedded nanofiber membrane for long-cycle lithium metal batteries

Materials Engineering of High-Performance Anodes as Layered Composites with Self-Assembled Conductive Networks

Carbon Nanotube/MXene Composite with a Dense Regular Connective Tissue Structure and Its Application in Lithium-Ion Batteries

High-Performance Lithium Batteries Achieved by Electrospun MXene-Enhanced Cation-Selective Membranes

A composite dielectric membrane with low dielectric loss for dendrite-free lithium deposition in lithium metal batteries

Highly Flexible Graphene/Mn3O4 Nanocomposite Membrane As Advanced Anodes for Li-Ion Batteries

The enhanced performance of Li-ion batteries based on Co-MOF/MXene composites

ZnO Nanomembrane/Expanded Graphite Composite Synthesized by Atomic Layer Deposition As Binder-Free Anode for Lithium Ion Batteries

Membranes of MnO Beading in Carbon Nanofibers as Flexible Anodes for High-Performance Lithium-Ion Batteries

In Situ Coordinated Ultrathin Mof-Polymer Electrolyte Membrane with Vertically Aligned Transfer Channels for Solid Lithium Metal Batteries

Multiscale-structured polyvinylidene fluoride/polyacrylonitrile/ vermiculite nanosheets fibrous membrane with uniform Li+ flux distribution for lithium metal battery

Polymer-Laden Composite Lignin-Based Electrolyte Membrane for High-Performance Lithium Batteries

Construction of flexible asymmetric composite polymer electrolytes for high-voltage lithium metal batteries with superior performance

Multifactorial engineering of biomimetic membranes for batteries with multiple high-performance parameters

Lithium‐Ion Batteries: Flexible Composite Solid Electrolyte Facilitating Highly Stable “soft Contacting” Li–Electrolyte Interface for Solid State Lithium‐Ion Batteries (adv. Energy Mater. 22/2017)

Electrolyte Superwetting and Electrode Friendly of Porous Membrane for Better Cycling Stability of Lithium Metal Batteries

Janus Quasi-Solid Electrolyte Membranes with Asymmetric Porous Structure for High-Performance Lithium-Metal Batteries.