Abstract:Most polymers are long-lasting and produced from monomers derived from fossil fuel sources. Bio-based and/or biodegradable plastics have been proposed as a sustainable alternative. Amongst those available, polyhydroxyalkanoate (PHA) shows great potential across a large variety of applications but is currently limited to packaging, cosmetics and tissue engineering due to its relatively poor physical properties. An expansion of its uses can be accomplished by developing nanocomposites where PHAs are used as the polymer matrix. Herein, a PHA biopolyester was melt blended with graphene nanoplatelets (GNPs) or with a 1:1 hybrid mixture of GNPs and carbon nanofibers (CNFs). The resulting nanocomposites exhibited enhanced thermal stability while their Young's modulus roughly doubled compared to pure PHA. The hybrid nanocomposites percolated electrically at lower nanofiller loadings compared to the GNP-PHA system. The electrical conductivity at 15 wt.% loading was ~ 6 times higher than the GNP-based sample. As a result, the electromagnetic interference shielding performance of the hybrid material was around 50% better than the pure GNPs nanocomposites, exhibiting shielding effectiveness above 20 dB, which is the threshold for common commercial applications. The thermal conductivity increased significantly for both types of bio-nanocomposites and reached values around 5 W K-1 m-1 with the hybrid-based material displaying the best performance. Considering the solvent-free and industrially compatible production method, the proposed multifunctional materials are promising to expand the range of application of PHAs and increase the environmental sustainability of the plastic and plastic electronics industry.

Conductive polymer biocomposites based on poly(3-hydroxybutyrate) and poly(butylene adipate-co-terephthalate) with various graphene fillers for thermistor applications

Preparation of Functionalized Graphene/thermal Conductive Polyurethane Films

High temperature co-polyester thermoplastic elastomer nanocomposites for flexible self-regulating heating devices

Flexible Piezoresistive Polystyrene Composite Sensors Filled with Hollow 3D Graphitic Shells

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects

Thermal conductivity of 3d graphene filled polymer composite

Multifunctional Biocomposites based on Polyhydroxyalkanoate and Graphene/Carbon-Nanofiber Hybrids for Electrical and Thermal Applications

Flexible Composite Films with Ultrahigh Through-plane Thermal Conductivity yet Low Graphene Content

Thermal Management Performance of Polyvinyl Alcohol Composite with Boron Phosphide Decorated Reduced Graphene Oxide

Flexible and Stretchable Temperature Sensors Fabricated Using Solution‐Processable Conductive Polymer Composites

Crystallization behavior and sensing properties of bio‐based conductive composite materials

Graphene-based polymer composite films with enhanced mechanical properties and ultra-high in-plane thermal conductivity

Thermoresistive properties of multilayer graphene sheet/polypropylene composites using four dissimilar fillers

Study on thermal properties of graphene foam/graphene sheets filled polymer composites

Preparation and Thermal Properties of the Graphene-Polyolefin Adhesive Composites: Application in Thermal Interface Materials

Self-healing thermally conductive polymer composites based on polyvinyl alcohol with dynamic borate ester and hydrogen bonds

Highly Thermally Conductive 3D Printed Graphene Filled Polymer Composites for Scalable Thermal Management Applications

Comprehensive Study of Mechanical, Electrical and Biological Properties of Conductive Polymer Composites for Medical Applications through Additive Manufacturing