Abstract:The effects of adding graphene to a polyetherimide matrix at various temperatures on its thermal conductivity were investigated by a series of molecular dynamics simulations within the framework of response surface methodology. In this work, an I‐optimal response surface model was used to systematically investigate the effects of graphene (Gr) content (Factor A; 0–10 wt%), temperature (Factor B; 0–200°C), and Gr layer structure (Factor C; monolayer versus five‐layer) on the thermal conductivities of PEI/Gr nanocomposites, which were determined using reverse non‐equilibrium molecular dynamics (RNEMD) simulation with the Müller‐Plathe algorithm. Based on a reduced quadratic model that was fit to the data, the effect of Factor A on thermal conductivity was found to be more pronounced for the PEI/Gr nanocomposite with the five‐layer Gr structure. Moreover, Factor B had expectedly the largest effect on thermal conductivity, followed by Factor C. However, these two factors were involved in significant interactions with Factor A. Based on numerical optimizations, the predicted thermal conductivities of the PEI/Gr nanocomposites varied from 0.057 (minimum) to 0.174 W m−1 K−1 (maximum). Overall, the maximum thermal conductivity of the PEI/Gr nanocomposite may be obtained at any given temperature in the range of 0–200°C by the addition of multi‐layer Gr (a cheaper alternative to monolayer Gr) at a content of 10 wt%. For example, the addition of 10 wt% five‐layer Gr to PEI at room temperature (25°) results yields an increase in its thermal conductivity of about 30%. Also, going from 0 to 100°C, an increase of about 76% is predicted for the thermal conductivity of the PEI/Gr nanocomposite containing 10 wt% five‐layer Gr. The results of this study shed light on the interactions between the three investigated factors. Highlights Thermal conductivities of polyetherimide/graphene (PEI/Gr) nanocomposites simulated. Graphene (Gr) content, temperature, and Gr layer structure affected the thermal behavior. Response surface methodology (RSM) aided in the identification of factorial interactions. Numerical optimization of the thermal conductivities enabled by a predictive model.

Thermoresistive properties of multilayer graphene sheet/polypropylene composites using four dissimilar fillers

Electromechanical response of multilayer graphene sheet/polypropylene nanocomposites and its relationship with the graphene sheet physicochemical properties

Effects of Graphite Nanosheet Size on Thermal Storage Property of Composite PCMs

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Study on thermal properties of graphene foam/graphene sheets filled polymer composites

Thermal conductivity of 3d graphene filled polymer composite

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

Study on Thermal Properties of Graphene Foam/graphene Sheets Filled Polymer Composites Part A Applied Science and Manufacturing

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

High Electrical Conductivity in Polydimethylsiloxane Composite with Tailored Graphene Foam Architecture

A multiscale study of the filler-size and temperature dependence of the thermal conductivity of graphene-polymer nanocomposites

Mechanical and Dielectric Properties of Graphene Incorporated Polypropylene Nanocomposites Using Polypropylene-Graft-maleic Anhydride As a Compatibilizer

Conductive polymer biocomposites based on poly(3-hydroxybutyrate) and poly(butylene adipate-co-terephthalate) with various graphene fillers for thermistor applications

A Trade-off Study Toward Highly Thermally Conductive and Mechanically Robust Thermoplastic Composites by Injection Moulding

A systematic molecular dynamics study of the thermal conductivities of polyetherimide/graphene nanocomposites using response surface methodology

Thermally Conductive Graphene-Polymer Composites: Size, Percolation, and Synergy Effects

Positive Temperature Coefficient and Electrical Conductivity Investigation of Hybrid Nanocomposites Based on High‐Density Polyethylene/Graphene Nanoplatelets/Carbon Black

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Preparation and Thermal Properties of the Graphene-Polyolefin Adhesive Composites: Application in Thermal Interface Materials

Enhanced Thermal Conductivity in Polyamide 6 Composites Based on the Compatibilization Effect of Polyether-Grafted Graphene