Abstract:A new kind of membrane was prepared by blending poly( acrylic acid) with cellulose acetate propionate for the separation of ethyl tert-butyl ether and ethanol mixtures. The properties of the membranes were evaluated by the pervaporation separation of mixtures of ethyl tert-butyl ether/ethanol and the sorption experiments. The experimental results showed that the selectivity and the fluxes of this membrane depend on the blend composition and on that of processed feed mixtures. With respect to temperature, the ethanol fluxes obey the Arrhenius equation. The fluxes increase with the increase of the poly(acrylic acid) content in the blended membrane, the ethanol concentration in the feed, and the experimental temperature. But the selectivity decreases as the poly(acrylic acid) content and the experimental temperature are raised up. When the feed composition is varied, this membrane shows the special characteristics at the azeotropic composition. In the vicinity of th azeotropic point, the minimum values of ethanol concentration in the permeate and in sorption solution are obtained. The swelling ratios increase with an increase in the temperature and the ethanol concentration. The ethanol concentration in the sorption solution is also influenced by the temperature and composition of the mixtures. When the temperature increases, the sorption selectivity of the membrane decreases. (C) 1997 John Wiley & Sons, Inc.

Methanol-selective membranes for the pervaporative separation of methanol–toluene mixtures

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Study on Swelling Behavior and Pervaporation Properties of AA–MMA–BA Copolymers for Separation of Methanol/mtbe/c5 Mixtures

Separation of methanol–benzene and methanol–toluene mixtures by pervaporation: effects of thermodynamics and structural phenomenon

A Triacetate Cellulose Membrane for the Separation of Methyl Tert-Butyl Ether/Methanol Mixtures by Pervaporation

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Recovering Ethyl Acetate from Aqueous Solution Using P(VDF-co-HFP) Membrane Based Pervaporation

A study on the pervaporation of water–acetic acid mixtures through ZSM-5 zeolite membranes

Influence of Viscosity Slope Coefficient of CA and Its Blends in Dilute Solutions on Permeation Flux of Their Films for MeOH/MTBE Mixture

A High Performance Membrane for Sorption and Pervaporation Separation of Ethyl Tert-Butyl Ether and Ethanol Mixtures

Sorption and Pervaporation Separation of Ethyl Tert-Butyl Ether and Ethanol Mixtures Through A Blended Membrane

Crosslinked poly(vinyl alcohol) membranes for separation of dimethyl carbonate/methanol mixtures by pervaporation

Zif-8 Filled Polydimethylsiloxane Membranes for Pervaporative Separation of N-Butanol from Aqueous Solution

Influence of the Dilute‐solution Properties of Cellulose Acetate in Solvent Mixtures on the Morphology and Pervaporation Performance of Their Membranes

Preparation of Cellulose Acetate Membrane Filled with Metal Oxide Particles for the Pervaporation Separation of Methanol/methyl Tert-Butyl Ether Mixtures

Selective separation of water-ethanol mixtures through copolymeric membranes: i. acrylic acid and acrylonitrile copolymer and its ionized membranes

Separation of Dimethyl Carbonate/Methanol Mixtures by Pervaporation with Poly(Acrylic Acid)/Poly(Vinyl Alcohol) Blend Membranes

Pervaporation Recovery of Acetone-Butanol from Aqueous Solution and Fermentation Broth Using Htpb-Based Polyurethaneurea Membranes

Pervaporation Performance Ofpoly(acrylic Acid)-Poly(vinyl Alcohol) Blend Membrane for Separation of Methanol-Dimethyl Carbonate Azeotrope

PPMS Composite Membranes for the Concentration of Organics from Aqueous Solutions by Pervaporation

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer