Abstract:The AC impedance response of mixed ionic and electronic conductors (MIECs) exposed to a chemical potential gradient is derived from first principles. In such a system, the chemical potential gradient induces a gradient in the carrier concentration. For the particular system considered, 15% samarium doped ceria (SDC15) with Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(3-delta) (BSCF) and Pt electrodes, the oxygen vacancy concentration is a constant under the experimental conditions and it is the electron concentration that varies. The resulting equations are mapped to an equivalent circuit that bears some resemblance to recently discussed equivalent circuit models for MIECs under uniform chemical potential conditions, but differs in that active elements, specifically, voltage-controlled current sources, occur. It is shown that from a combination of open circuit voltage measurements and AC impedance spectroscopy, it is possible to use this model to determine the oxygen partial pressure drop that occurs between the gas phase in the electrode chambers and the electrode|electrolyte interface, as well as the interfacial polarization resistance. As discussed in detail, this resistance corresponds to the slope of the interfacial polarization curve. Measurements were carried out at temperatures between 550 and 650 degrees C and oxygen partial pressure at the Pt anode ranging from 10(-29) to 10(-24) atm (attained using H(2)/H(2)O/Ar mixtures), while the cathode was exposed to either synthetic air or neat oxygen. The oxygen partial pressure drop at the anode was typically about five orders of magnitude, whereas that at the cathode was about 0.1 atm for measurements using air. Accordingly, the poor activity of the anode is responsible for a loss in open circuit voltage of about 0.22 V, whereas the cathode is responsible for only about 0.01 V, reflecting the high activity of BSCF for oxygen electro-reduction. The interfacial polarization resistance at the anode displayed dependences on oxygen partial pressure and on temperature that mimic those of the electronic resistivity of SDC15. This behavior is consistent with hydrogen electro-oxidation occurring directly on the ceria surface and electron migration being the rate-limiting step. However, the equivalent resistance implied by the oxygen partial pressure drop across the anode displayed slightly different behavior, possibly indicative of a more complex reaction pathway.

Study of solid electrolyte polarization by a complex admittance method

(Invited) Mapping Internal Polarization in YSZ Electrolytes Using Grain Size

Probe electrode study of cathodically polarized PtIr-YSZ interfaces

Electrode kinetics at the Pt, O2|La0.9Sr0.1ScO3-δ interface

Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF

Polarization Behavior of High Temperature Solid Oxide Electrolysis Cells (SOEC)

Theoretical consideration of Solid Oxide Electrolyzer Cell with zirconia-based electrolyte operated under extreme polarization or with low supply of feedstock chemicals

Impedance Behavior of YSZ - SrTi0.6Fe0.4O3-δ Ceramic Composite

Oxygen Potential Transition in Mixed Conducting Oxide Electrolyte

Impedance analysis of thin YSZ electrolyte for low-temperature solid oxide fuel cells

Mechanisms Investigation of Cathodic-Anodic Coupling Reaction of Zr-H2O at 360 °C by Long-Term In-Situ Electrochemical Polarization Analyses

Active, Durable Bismuth Oxide-Manganite Composite Oxygen Electrodes: Interface Formation Induced by Cathodic Polarization

Ambient Pressure XPS Study of Mixed Conducting Perovskite-Type SOFC Cathode and Anode Materials under Well-Defined Electrochemical Polarization

A Practical Approach for Identifying Various Polarization Behaviors of Redox-Stable Electrodes in Symmetrical Solid Oxide Fuel Cells

Electrical and Hydrogen Reduction Enhances Kinetics in Doped Zirconia and Ceria: II. Mapping Electrode Polarization and Vacancy Condensation in YSZ

Predicting ionic conductivity of solid oxide fuel cell electrolyte from first principles

Thermochemical Expansion and Protonic and Electronic Hole Conductivity of Grain Interior and Grain Boundaries in 10 Mole% Y-Substituted SrZrO3

Oxygen Vacancy Ordering and Molten Salt Corrosion Behavior of ZnO-Doped CeYSZ for Solid Oxide Membranes

Polarization of disk electrodes in high-conductivity electrolyte solutions

Study on High-Temperature Electronic Conductivity and Thermal Shock Resistance of Zirconia Used as an Oxygen Sensor

Composite Electrodes of Platinum, 5 mol% Yttria Stabilized Zirconia and 10 mol% Gadolinia Doped Ceria