Abstract:The resource tests of plain bearings with metal-polymer tribo-systems developed for the aviation industry are presented. The purpose of the work is to determine the wear resistance of modern anti-friction polymer materials in plain bearings in comparison with metal fluoroplastic tape. The uniqueness of the tests lies in the use of a combination of high-performance polymer materials in a pair with chromium and molybdenum coating during the reversible movements of plain bearings. Since the use of such bearings is mass in nature, the use of titanium materials in the manufacture of bearing cages will allow to significantly reduce the weight of the aircraft and increase its efficiency. It was determined that a plain bearing with a polymer material of carbon and polyamide fibers and PTFE with functional additives shows a wear resistance 1.8-2 times greater on the segment of 40-100 thousand cycles than bearings with other materials during laboratory resource tests. Also, industrial tests have established that after 2 million cycles, a hinged bearing with a metal-polymer tape shows a result that is 1.2-1.5 times lower in wear resistance than polymer materials, but all these results are within the tolerances of normal bearing operation. Industrial tests have proven that at replacing the inner ring of a plain sliding bearing with a titanium alloy with a molybdenum coating, the wear resistance is almost the same or slightly lower than when the polymer rubs against steel. Technological recommendations have been developed and a new design and materials of plain sliding bearings with polymer anti-friction coatings for the aviation industry have been proposed. The implementation of technological recommendations in the production of bearings will allow to move away from the universality of the use of plain bearings and extend their wear resistance and durability in general due to the use of the full thickness of the polymer material and the development of bearings with predicted characteristics for a specific task.

Composites for Aerospace Dry Bearing Applications

Friction and Wear Performance of Various Polymer Coatings for Journal Bearings under Stop Start Sliding

ANALYTICAL STUDY OF DURABILITY AND CONTACT CHARACTERISTICS OF METAL-POLYMER COMPOSITE SLIDING BEARINGS FOR MEANS OF TRANSPORT

Selected Tribological Properties and Vibrations in the Base Resonance Zone of the Polymer Composite Used in the Aviation Industry

Composite Materials for Hybrid Aerospace Gears

Dry Friction and Wear Behavior of Laser-Sintered Graphite/Carbon Fiber/Polyamide 12 Composite

Solid polymer bearings in tribological applications

Researches on Friction Performance of Water-Lubricated Polymer Composite Journal Bearings Based on Experiments

A review on tribology of polymer composite coatings

Resource testing of modified plain bearings for the aviation industry

Bearings in Aerospace, Application, Distress, and Life: A Review

Evaluation of polymer composites for sliding and abrasive wear applications

Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites

Comparison of Friction and Wear Performances of Pure Poly-ether-ether-ketone Polymer and Carbon Fiber Reinforced Poly-ether-ether-ketone Polymer Composite for Bushing and Bearing Applications

Polymer composites based on aromatic polyamide and fillers of spherical and layered structure for friction units of high-performance equipment

Optimization and tribological performance of PEEK based composite coatings reinforced with PTFE for friction pairs of aviation hydraulic pumps

Surface topography modification, Film transfer and Wear mechanism for fibre reinforced polymer composites—An Overview

Influence of Counter Surface Roughness and Lay on the Tribological Behaviour of Self-Lubricating Bearing Materials in Dry Sliding Conditions at High Contact Pressures

Role of transfer film formation on the tribological properties of polymeric composite materials and spherical plain bearing at low temperatures

Wear performance of bulk oriented nanocomposites UHMWPE/FMWCNT and metal-polymer composite sliding bearings

Tribological behavior of PTFE/Nomex/phenolic composite lubricant under cold forming condition in the bearing assembly process