Abstract:The hybrid wear system consisting of independent polyether-ether-ketone (PEEK) and polytetrafluoroethylene (PTFE) components sliding together against steel has been proven to improve the tribological performance of PEEK without compromising its excellent mechanical properties. In the present work, the effect of the countersurface roughness upon the tribological performance of the hybrid wear system is investigated. In a dual-pin-on-disk tribometer, steel rings with various roughness (Ra = 0.04–0.5) are introduced to PEEK-PTFE/Al 2 O 3 -steel (PPAS) hybrid wear systems containing hard nano particles and to PEEK-PTFE/brass-steel (PPBS) hybrid wear systems containing soft micron-scale particles. The morphologies of the worn surfaces demonstrate that the outstanding tribological performance of the hybrid wear system is closely related to the tribo-chemistry and the formation of tribofilms, which jointly depend on the properties of the fillers and on the roughness. The PPAS hybrid wear system is more suitable for low roughness conditions, as the wear debris containing nano-alumina particles will be pressed into the deep processing grooves of the steel surface, thereby hindering the occurrence of the tribo-chemical reaction. By contrast, the PPBS hybrid wear system exhibits good performance under high roughness conditions. With a smooth countersurface, the micron-sized brass particles will deposit onto the worn PTFE surface, and lead to severe abrasive wear on the countersurface, thereby hindering the formation of a transfer film. However, both the PPAS and the PPBS system provide exceptional tribological performance under moderate roughness conditions, due to the formation of high-quality fluorine-based tribofilms on each worn surface with the assistance of tribo-chemistry.

Optimization and tribological performance of PEEK based composite coatings reinforced with PTFE for friction pairs of aviation hydraulic pumps

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

Tribological Properties of Polyether–Ether–Ketone-Based Coating under Mixed and Boundary Aviation Kerosene-Lubrication Condition

Tribological Properties of PEEK and Its Composite Material under Oil Lubrication

The effects of filler type on the friction and wear performance of PEEK and PTFE composites under hybrid wear conditions

The Research of Polyetheretherketone Based Composite Coatings

Tribological Properties Of Polytetrafluoroethylene-Based Composite In Different Lubricant Media

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

Significantly Enhanced Tribological Properties of PTFE/PEEK Fabric Composites by Macroporous Metal − Organic Frameworks with Solid–liquid Synergistic Lubrication

Geometry Effect of Different PTFE Fillers on Self-Lubricating PF Composites: Mechanical and Tribological Properties

Tribological properties of PEEK-based composite coating prepared by thermal spraying

Tribological properties of PTFE/Kevlar fabric composites under heavy loading

Friction and Wear Behavior of PTFE Coatings Modified with Poly (methyl Methacrylate)

Enhancement of the Water-Lubricated Tribological Properties of Hybrid PTFE/Nomex Fabric Laminate Composite via Epoxy Resin and Graphite Filler

Tribological Behavior of Reinforced PTFE Composites and Un-Reinforced Polyketone-Based Materials against Coated Steel

Enhancement of friction and wear performance of polytetrafluoroethylene composites through the synergistic effect of hard fillers

Preparation and Tribological Behaviors of Lubrication-Enhanced PEEK Composites

Coupled effect of filler and countersurface roughness on the tribological performance of the PEEK-PTFE-steel hybrid wear system

Significant Enhancement of Tribological Properties of Microcapsule/epoxy Composites in the Presence of High Loads by Incorporating PTFE

Effect of Oxygen and Moisture on the Friction and Wear of Carbon Fiber-Reinforced Polymers