Nonuniform Wear Mechanism of Kevlar/Polytetrafluoroethylene Fiber-Reinforced Composites
Liu Jian,Lu Fei,He Tiantian,Pang Xianjuan,Song Chenfei,Zhang Yongzhen
DOI: https://doi.org/10.1007/s11665-022-07305-2
IF: 2.3
2022-01-01
Journal of Materials Engineering and Performance
Abstract:In this study, the MYB-500 high-frequency and high-load oscillatory tribotester was used to carry out life cycle tests to investigate the self-lubricating properties and damage behavior of Kevlar/PTFE fiber-reinforced composite. Wear debris and wear behavior of the frictional surface were analyzed to explore key factors affecting the self-lubricating stability and service life of materials. Results show that the life cycle of Kevlar/PTFE fiber-reinforced composite can be divided into three stages by the change of friction coefficient and wear depth, including running-in, stable and failure stage. The life stage and performance of materials can be evaluated by monitoring the friction temperature and friction coefficient in real time. When the friction coefficient reaches 0.16 or the friction temperature monitored exceeds 150 °C, it can be determined that the material life is terminated. From wear surface analysis and change of wear loss, it is indicated that the wear exhibits notable nonuniform characteristic. Based on the wear surface of material after failure, it is concluded that the initial nonuniformity of the material thickness has significant influence on wear damage as well as life cycle. Therefore, the self-lubricating behavior of material can be improved by modifying relevant process parameters to obtain the uniform material thickness, and meanwhile, the wear life was increased from 242 to 293 h.