Preparation and tribological behavior of polytetrafluoroethylene/metal mesh composites with sandwich structure

Wenli Zhang,Xiaolei Li,Yan Zhang,Yu Dong,Weigang Yao,Lei Liang,Xiaowen Qi

DOI: https://doi.org/10.1002/app.50803

IF: 3

2021-04-07

Journal of Applied Polymer Science

Abstract:<p>Polytetrafluoroethylene (PTFE) owns an excellent self‐lubricating performance, but its wear rate is very high due to the large‐scale spalling of the matrix in the friction. In this paper, A new kind of PTFE composites with sandwich structure was prepared by layer‐press technology, whose middle layer is filled with metal mesh. The influence of the mesh structure and mesh density of middle metal layer on tribological properties of composites were researched in detail. The results revealled that the metal mesh located in the composites can efficiently prevent the large‐scale spalling of PTFE, which induces the sample of PTFE/500# plain woven dutch metal mesh (PTFE‐500#PWD) to have a lower wear rate (9 × 10⁻⁵ mm³/Nm) and COF (0.106) under the fixed experimental condition. The prepared PTFE/metal mesh composites reveal excellent anti‐friction and anti‐wear performance, which can be used to fabricate a new kind of self‐lubricating materials.</p>

polymer science

What problem does this paper attempt to address?

The paper attempts to address the issue of high wear rate of polytetrafluoroethylene (PTFE) materials during friction due to large-scale peeling of the substrate. Although PTFE has excellent self-lubricating properties, its high wear rate during friction limits its widespread application in many precision devices. To improve this issue, researchers have prepared a PTFE/metal mesh composite material with a sandwich structure and studied the effect of the structure and density of the metal mesh on the tribological properties of the composite material.

Specifically, the main objectives of the paper include:
1. **Preparation of new composite materials**: Preparation of PTFE composite materials with an intermediate metal mesh layer through lamination technology.
2. **Study of tribological properties**: Detailed study of the effect of the structure and density of the metal mesh on the tribological properties (such as friction coefficient and wear rate) of the composite material.
3. **Analysis of anti-friction and anti-wear mechanisms**: Systematic analysis of the anti-friction and anti-wear mechanisms of the composite material under different friction conditions.

Through these studies, the paper aims to develop a new type of self-lubricating material to improve the wear resistance and anti-friction performance of PTFE in practical applications.