Abstract:Erosion wear is a common and serious problem in slurry transportation field. In order to improve the erosion wear performance of high chromium cast iron (HCCI), a new type of high chromium cast iron with 0.38% nitrogen (HCCI-N) was fabricated by vacuum induction positive pressure melting furnace under 0.4 MPa nitrogen partial pressure on the basis of the established pseudo-binary phase diagram of (Fe-27Cr-2.2C)-N alloy system. The microstructure and erosion wear behavior of HCCI-N were researched in alkaline sand slurry. Results show that the microstructure of HCCI-N has the characteristics of multi-scale and multi-type carbides, including eutectic M7C3 (∼20μm), secondary M23C6 (∼2μm) and Cr2C (∼1μm), distributed in matrix composed of martensite and austenite. A sandwich structure of M7C3-ferrite-martensite was formed at the interface of eutectic M7C3. The nitrogen element is mainly distributed in matrix. The Cr2C (-1011) is coherent with Martensite (110). The erosion wear is caused by the synergy of corrosion and wear. The pure wear rate (Ve) of HCCI-N accounts for 71%∼93% of total erosion wear rate (Vt) under different test conditions, indicating that wear loss mainly results from the mechanical action under alkaline sand slurry. Nevertheless, the synergism rate of corrosion and wear (Vs) is also significant to Vt, which accounts for 7%-29% of Vt for HCCI-N relative to 13%-31% of HCCI. The HCCI-N has more excellent erosion wear resistance compared with that of HCCI under all the test conditions, and the optimal wear resistance of HCCI-N is 1.34 times that of HCCI. The nitrogen and chromium dissolved in matrix improves corrosion resistance, and reduces the synergistic rate of corrosion and wear. Multi-scale carbide strengthens the matrix and resists mechanical wear. The combined action of the two factors makes the HCCI-N have excellent erosion wear resistance.

Microstructure and properties of hypereutectic high chromium cast iron containing nitrogen

Microstructure Evolution and Properties of Nitrogen-Bearing Hypereutectic High Chromium Cast Iron after Quenching

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

The Effect of N Content on the Microstructure and Wear Resistance of Improved High-Carbon Chromium Bearing Steel

Influences of Partial Substitution of C by N on the Microstructure and Mechanical Properties of 9cr18mo Martensitic Stainless Steel

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Microstructure and erosion wear properties of high chromium cast iron added nitrogen by high pressure in alkaline sand slurry

The Influence of Ni Content on the Microstructure and Impact Wear Resistance Performance of High-Chromium Casting Infiltration Coating

Effect of N Content on Microsegregation, Microstructure and Mechanical Property of Cast Ni-Base Superalloy K417g

Improving impact toughness of a high chromium cast iron regarding joint additive of nitrogen and titanium

Corrosion Wear of Hypereutectic High Chromium Cast Iron: A Review

Effect of element N on microstructure and tribological properties of CoCrFeNiV alloy at severe temperature

Effects of Nitrogen Content on Microstructures and Tensile Properties of a New Ni–Fe Based Wrought Superalloy

Effect of Increased N Content on Microstructure and Tensile Properties of Low-C V-microalloyed Steels

Effects of Nickel on the Microstructure, Mechanical properties and Corrosion Resistance of CoCrFeNixAl0.15Ti0.1 High Entropy Alloy

Refining Effect of Nb on Hypereutectic High-Chromium Cast Iron

Fabrication and abrasive wear property of high chromium cast iron with high vanadium and high nitrogen content (HCCI-VN)

Effect of Nitrogen Content on the Microstructure and Mechanical Properties of K4169 Alloy

Influence of Niobium Content on the Mechanical Properties and Abrasion Wear Resistance of Heat-Treated High-Chromium Cast Iron

Effect of quenching temperature on microstructure and properties of low silicon hypereutectic high chromium cast iron

Influence of Ni content on impact-abrasion wear resistance of medium-carbon low alloy cast steel