Abstract:In order to study the mechanical properties of seawater sea sand concrete and the durability damage law of seawater sea sand concrete under the action of seawater erosion, corresponding specimens were prepared and subjected to cube compressive strength, flexural strength, and dry-wet cycle tests by taking the volume dosage of glass fibers and polyvinyl alcohol fibers as variables. The test combined SEM scanning and EDS to analyze the microstructure of fiber-reinforced seawater sand concrete, and established a model based on the two-parameter Weibull probability distribution. The results show that the fiber has a significant effect on improving the mechanical properties and erosion resistance of seawater sand concrete. When the total volume content is 0.3% and the mixing ratio is 1:1, the improvement effect is the best. The maximum increase in cubic compressive strength was 24.2%; the maximum increase in flexural strength was 38.8%. After the specimens were subjected to wet and dry cycles for 360d, the maximum reduction in mass loss rate was 41.23%; the maximum reduction in strength loss rate was 27.55%. As observed from the microscopic images, the main disadvantage of SSC is that the salt crystallization and swelling matter produced by the erosion ions will weaken the bond between aggregate and mortar, resulting in defects in the interfacial transition zone (ITZ). Under the action of dry-wet cycles, the alternating dry-wet forces, the expansion pressure generated by expansive substances and the crystallization pressure generated by salt crystallization will change the microstructure, and therefore the damage of the specimen will deepen with the extension of erosion time. The microscopic images also show that the doping fibers can improve the internal integrity and compactness of the matrix, thus significantly improving the mechanical properties and durability of seawater sea sand concrete. In this test, a damage model was established based on the two-parameter Weibull distribution model, and the damage law between strength loss and dry-wet cycles was fitted, which provides a favorable basis to study the damage of seawater sea sand concrete under wet-dry cycling.

Study of Mechanical Properties of Sand Layer Grouting Reinforcement under Seawater Erosion

Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Unraveling the shear behaviors of bonding interface for post-grouted sandstones considering the temperature and confining pressure effects

Development and Field Test of New Environmentally Friendly Water-Rich Sand Grout Material

Comparative study on the mechanical properties of solidified silty-fine sand reinforced by permeable polymer and traditional grouting materials

Study of Grouting Reinforcement Mechanism in Fractured Rock Mass and Its Engineering Application

Study on Comprehensive Treatment Method of Curtain Grouting in Water-Rich Sand Layer

Study of grouting effectiveness based on shear strength evaluation with experimental and numerical approaches

Experimental study on the durability of cement-stabilized soil for post-grouted piles in calcareous sand under marine environment

Experimental study on the mechanical properties, acoustic emission characteristics, and permeability evolution of sandstone under triaxial hydromechanical coupling

Study on mechanical properties and anti-erosion performance of fiber reinforced seawater sea sand concrete

An experimental study on water and sand leakage disaster of gap-graded sandy soil under different grain size distributions

Experimental and theoretical model study on grouting reinforcement effect of fractured rock mass

Diffusion properties and cementitious characteristics of ultrafine cement slurry in coral sand

Magnesium ion corrosion in subsea tunnel grouting: Insights, mechanisms, and optimization strategies for enhanced durability

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Experimental Study on Fresh State Properties of Single-Liquid Semi-Inert Synchronous Grouting for Shield Tunnels in Water-Rich Sand Strata

Laboratory modelling on sand erosion caused by tunnel leakage in water-rich sandy strata

Mechanical Properties of Iron Tailing Sand Grout Sleeve Joints and Force Analysis