Experimental investigation on the failure mechanism of grouted rock mass: Mesostructure and macroscopic mechanical behavior
Xiangrui Qin,Huimei Zhang,Rongping Xu,Jiafan Zhang,Chao Yuan
DOI: https://doi.org/10.1016/j.engfailanal.2024.108304
IF: 4
2024-04-13
Engineering Failure Analysis
Abstract:Grouting is a common method to improve the mechanical properties of the fractured rock mass. Understanding the effect of grouting on the mechanical properties of fractured rock mass is considered essential for the establishment of efficient grouting designs and the development of new grouting materials. Therefore, in this research, a series of experiments are conducted to reveal the influence of grouting material on the mesostructure and macroscopic mechanical behavior of the grout-rock interface. Firstly, grouted samples with different grouting materials (ordinary Portland cement (OPC), microfine cement (MFC), and epoxy resin (EPR)) were prepared. Then, nuclear magnetic resonance (NMR) and X-ray computed tomography (CT) were carried out on the grouted rock mass to investigate the pore phase composition and mesostructure. Subsequently, correlating acoustic emission (AE) counts and shear stress-displacement curves reveal the shear failure process of the grouted rock mass. Finally, the failure mechanism of grouted rock mass was discussed in detail. The results displayed that the damage characteristic during shear failure of the grouted rock mass may be inferred from the AE counts. The shear strength of the sample grouted with OPC, MFC, and EPR is 8.3%, 41.5%, and 142.8% of that of intact rock, respectively. EPR reduces the pore content at the grout-rock interface compared with cement-based grout, especially the macropores and the micropores. Compared with the rock layer, the number of pores at the grout-rock interface of the sample grouted with OPC, MFC, and EPR is reduced by 43.3%, 57.1%, and 64.3%, respectively. The hydrophilicity of the rock leads to a discrepancy in the hydration degree of cement-based grout, which causes uneven shrinkage of the grout and produces cracks. However, as a chemical grouting material, EPR may permeate into the rock interior and modify the mesostructure of the grout-rock interface. The grout-rock bonding and mesostructure of the grout-rock interface dominate the failure mechanism, thus determining the macroscale mechanical properties of the grouted rock mass.
engineering, mechanical,materials science, characterization & testing