Abstract:This paper presents a comprehensive study on the stator vibration properties in synchronous generators under varied static air–gap eccentricity (SAGE) conditions. Current studies mainly focus on the electromechanical and thermal properties such as stator/rotor vibration, electromagnetic torque, phase current, stator temperature, etc., in single and combined faults composed of SAGE and winding interturn short circuit, while the dangerous position of the stator core due to the over stator vibrations caused by 3D SAGE is rarely investigated. Differently from the other researches, this work concentrates on the radial magnetic pull per unit area (MPPUA) and the axial unbalanced magnetic pull (UMP) on the stator to investigate the radial and the axial vibrations, taking into account not only the conventional radial SAGE, but also the axial SAGE and the combined SAGE (mixture of radial SAGE and axial SAGE). A 5kVA two-pole prototype synchronous generator, which is designed and manufactured by the authors, is employed as the study object of the finite element analysis (FEA) and the experiment for a validation. The proposed study as well as the 3D eccentricity simulating structure scheme of the prototype generator can be used as a reference for the further/similar investigations. It is shown that the most dangerous position of the stator core is close to the minimum air gap length point. Such conclusion can be employed to detect the detailed 3D eccentricity location and specifically prevent the insulation damage of the stator core.

Impact of Static Air-Gap Eccentricity on Thermal Responses of Stator Winding Insulation in Synchronous Generators

A comprehensive study on stator vibrations in synchronous generators considering both single and combined SAGE cases

Enhanced Ventilation and Thermal Performance by Skewed Through Holes on Rotor Yoke in Forced Air-Cooled Permanent Magnet Wind Generators

Impact of Static Air-Gap Eccentricity Fault on Synchronous Generator Efficiency

Impact of Stator Interturn Short Circuit Position on End Winding Vibration in Synchronous Generators

A New External Search Coil Based Method to Detect Detailed Static Air-Gap Eccentricity Position in Nonsalient Pole Synchronous Generators

Impact of Radial Air-Gap Eccentricity on Stator End Winding Vibration Characteristics in DFIG

Study on aging extent of stator insulation in a large turbogenerator

STUDY ON THE AGING CHARACTERISTICS OF STATOR WINDING INSULATION IN LARGE GENERATOR BASED ON OPERATING HISTORY

Finite Element Analysis And Evaluation Of Stator Insulation In High Voltage Synchronous Motor

Diagnosis Of Stator Winding Insulation Of Large Generator Based On Partial Discharge Measurement

AGING DIAGNOSIS OF LARGE GENERATOR WINDING INSULATION BASED ON DYNAMIC MECHANICAL ANALYSIS

Calculation of Nonlinear Stator Temperature Field after Insulation Aging for Large Generator

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

3D Lumped Parameter Thermal Network for Wound-Field Synchronous Generators

ANALYSIS ON AGING CONDITION OF STATOR WINDING INSULATION OF GENERATOR BASED ON THE MOMENT CHARACTERISTICS OF PARTIAL DISCHARGE

New Estimating Techniques for Multi-Stress Aging Test of Large Generator Stator Winding Insulation

STUDY ON THE AGING OF STATOR INSULATION OF LARGE GENERATORS USING THERMOANALYSIS

Determination Of Thermal And Thermo-Mechanical Stresses In Stator Insulation Of Wind Turbine Generator Based On Online Monitoring Temperatures

Sensitivity Analysis for Performance and Power Density Improvements in Salient-Pole Synchronous Generators

How to Analyze Aging Characteristics of Generator Main Insulation Based on Mechanical and Dielectric Loss