Abstract:In recent years, molten salt reactors (MSRs) have gained new momentum thanks to their potential for innovation in the nuclear industry, and several studies on their compliance with all the expected safety features are currently underway. In terms of passive safety, a strategy currently envisaged in accidental scenarios is to drain by gravity the molten salt, which acts both as fuel and coolant, in an emergency draining tank, ensuring both a subcritical geometry and proper cooling. To activate the draining system, a freeze plug, made of the same salt used in the core, is expected to open when the temperature in the core reaches high values. Up to this point, the freeze valve is still a key concept in the molten salt fast reactor (MSFR), and special attention must be paid to its analysis, given the requirement for passive safety, especially focusing on melting and solidification phenomena related to the molten salt mixture. This work aims to contribute to the macroscale modeling of melting and solidification phenomena relevant to the analysis of the freeze valve behavior. In particular, the focus is on the identification of the numerical models that can be adopted to achieve the quantitative insights needed for the design of the freeze valve. Among the ones available in the literature, the most appropriate models were selected based on a compromise between accuracy and computational efficiency. A critical look at the models allows for a synthetic and consistent formulation of the numerical models and their implementation in the open-source software OpenFOAM. The code was subsequently verified using analytical and numerical solutions already well established in the literature. A good agreement between the results produced by the developed solver and the reference solutions was obtained. In the end, the code was applied to simple case studies related to the freeze valve system, focusing on recognizing whether the developed code can model physical phenomena that can occur in a freeze valve. The results of the simulations are encouraging and show that the code can be used to model single-region melting or solidification problems. As such, this work constitutes a starting point for further development of the code, intending to achieve better quantitative predictions for the design of a freeze valve.

Verification and Demonstration of One-Dimensional Freezing Model in SAM for Salt-Cooled Reactor Analysis Applications

Development and Experimental Validation of a Heat Transfer Model for Spilled Molten Salt Pools

Numerical Modeling and Simulation of Melting Phenomena for Freeze Valve Analysis in Molten Salt Reactors

Development of a Thermal-Hydraulic Analysis Code and Transient Analysis for a Fluoride-Salt-Cooled High-Temperature Test Reactor

STUDY ON FREEZING TOLERANCE DESIGN OF THE DIRECT REACTOR AUXILIARY COOLING SYSTEM (DRACS) FOR FLUORIDE-SALT-COOLED HIGH-TEMPERATURE REACTOR (FHR)

Verification of the SAM Code by Means of the Method of Manufactured Solutions: Application to Molten Salt Reactor Multiphysics Simulation

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Development of a Thermal-Hydraulic Analysis Code and Transient Analysis for a FHTR

Development and Validation of a One-Dimensional Solidification Model-Part I: Analytical Model

Basic Verification of THACS for Sodium-Cooled Fast Reactor System Analysis

Steady Thermal Hydraulic Analysis for a Molten Salt Reactor

Analysis of Limiting Safety System Setting Based on Computational Fluid Dynamics Methodology for a Fluoride Salt Cooled High Temperature Reactor

SAM: A Modern System Code for Advanced Non-LWR Safety Analysis

Dimensioning of the Emergency Draining Tank for a Molten Salt Reactor Through Analytical Modeling

Computational Fluid Dynamics Analysis of a Fluoride Salt–Cooled Pebble-Bed Test Reactor

RELAP5 MOD3.2 Modification and Application to the Transient Analysis of a Fluoride-Salt-cooled High-Temperature Reactor

Numerical research on the influence of ocean conditions on the transient response of passive decay heat removal system of the floating Fluoride-Salt-Cooled High-Temperature Reactors

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

Thermal Hydraulic Studies of a Fluoride Salt Cooled High Temperature Test Reactor With Different CFD Methods

Numerical Analysis for a Molten Salt Reactor in the Presence of Fissile Lump

Conceptual Design of a Freeze-Tolerant Direct Reactor Auxiliary Cooling System for Fluoride-salt-cooled High-temperature Reactors