Abstract:A severe accident involving core melt in a nuclear reactor is a major concern especially after Fukushima. Thus, to mitigate the effects of core melt accidents, an ex-vessel core catcher is being developed for Advanced Indian Nuclear Reactors. The core catcher design envisages using special refractory material. The cooling strategy of the core catcher is one of the key components in the design of the core catcher. Performing a full-scale prototypic experiment is extremely challenging and prohibitory due to the involvement of very high temperature and presence of radioactive materials. Therefore, a computational fluid dynamics (CFD) model capable of simulating the coolability of the melt pool is important to develop. In the present work, a two-dimensional (2D) CFD model was developed to understand the heat transfer phenomenon and solidification of the heat-generating simulant melt pool. The 2D symmetry geometry of the simulated core catcher vessel was used. The CFD model considers appropriate models for melting and solidification to understand crust formation in the melt pool and the k-ε turbulence model to resolve turbulence inside the melt pool. A decay heat of 1 MW/m 3 was also considered inside the melt pool. The CFD simulation results were compared with the authors' experimental results. The experiment involved a scaled-down ex-vessel core catcher model (CCM) employing electrical heaters to simulate decay heat. The experiment was carried out by melting about 25 L of sodium borosilicate glass using a cold crucible induction furnace at about 1200°C and cooling it in the scaled-down CCM. The scaled-down CCM was strategically cooled in three phases, namely, air cooled, indirect side cooling, and complete top flooding. To overcome the complexities of simulation of the initial melt pour condition, the CFD simulation was initialized with the temperatures just after the melt pour was completed in the experiment. Similar to the experimental conditions, the CFD simulations were carried out in three phases by changing the boundary condition. Comparison of the temperatures of the melt pool by the CFD simulations and experiments at different locations gave reasonable agreement. The evolution of crust formation, melt pool temperatures, core catcher inner wall temperatures, and heat flux distribution were investigated in detail using the CFD model.

Semi-two-dimensional transient modeling of decay heat removal to an external reactor cavity cooling system for a gFHR with effects of heat generation pattern

Analysis of Transient Characteristics and Design Improvement of the Passive Residual Heat Removal System of NHR-200-II

CFD Modeling and Analysis of a Heat-Generating Melt Pool Under External Vessel Cooling and Top Flooding

Thermal Hydraulics Analysis of the Fluoride-Salt-Cooled, High-Temperature Reactor

Improvement of Heat-Removal Capability Using Heat Conduction on a Novel Reactor Cavity Cooling System (RCCS) Design with Passive Safety Features Through Radiation and Natural Convection

An Efficient 3D Tube-Level Flux-Thermal Model of External Tubular Receivers in Solar Power Tower Systems

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Comparison research on numerical modeling methods for the passive heat removal system of fast reactors based on PLANDTL benchmark experiment

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

Analysis of Thermal Stratification Effects in the Ring Headers of the Passive Residual Heat Removal System of NHR-200-II

Preliminary Investigation of THFR Passive Residual Heat Removal System

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

NUMERICAL ANALYSIS ON PERFORMANCE OF PASSIVE HEAT REMOVAL FROM HIGH TEMPERATURE GAS-COOLED REACTOR USING PHOENICS

CFD investigation on start-up transient of HPR1000 secondary side passive residual heat removal heat exchanger

CFD Simulation of Melt Pool Coolability in a Simulated Core Catcher Model

Assessment of 1-D Channel Flow Models for Tritium Breeding Blanket Cooling

Simulation Model of a Passive Decay Heat Removal System for Lead-Cooled Fast Reactors

CFD Analysis of the Passive Decay Heat Removal System of an LBE-Cooled Fast Reactor

A Consistent One-Dimensional Multigroup Diffusion Model for Molten Salt Reactor Neutronics Calculations

Modeling and Computation of Residual Heat Removal System of HTR-10 with Experimental Verification

CFD validation of condensation heat transfer in scaled-down small modular reactor applications, Part 1: Pure steam