Abstract:Based on the design parameters of the core decay heat removal through natural circulation of the typical high-power sodium-cooled fast reactor, using the system analysis program ERAC, a detailed analysis of the reactor core decay heat removal process characteristics after emergency shutdown was conducted, and comparative analysis was conducted on the cooling effects in the reactor under two sets of four conditions of decay heat removal system (DHRS). The results indicate that enabling DHRS requires thousands of seconds as it has a significant cooling effect on the core. During this period, the removal of core decay heat relies on the inherent thermal-hydraulic safety characteristics of the reactor. In principle, DHRS only needs to carry out the heat inside the reactor before the temperatures at the critical locations reaches its limit value, and keep the temperatures in a decreasing trend. When the independent heat exchanger (DHX) is arranged in the hot pool, the temperatures of the hot pool and the main vessel are relatively lower, which is beneficial for temperature control of the main vessel as the main circuit pressure boundary, and its effect is better than when arranged in the cold pool. In addition, different locating arrangements of DHXs will have an impact on the mass flow in the assembly wrappers and inter-wrappers, but the impact on the overall cooling effect on the core temperature is not significant. In order to reduce the investment and operating costs of nuclear power plants and then improve economic efficiency, it should be optimized on the natural circulation design of the pool-type sodium-cooled fast reactor. The optimization direction is to fully utilize the inherent thermal-hydraulic safety characteristics of the pool-type sodium-cooled fast reactor, reduce the requirements for the start cooling time and the power of heat discharge of DHRS. It is feasible to consider arranging all DHXs in the heat pool, reduce their volume, and lowering their design value of heat dissipation power. Alternatively, without compromising safety, other more economical and convenient effective methods could be selected. These research results will provide important references for the natural circulation design of pool-type liquid metal reactors such as commercial fast reactor and integrated fast reactor in China.

Comparison research on numerical modeling methods for the passive heat removal system of fast reactors based on PLANDTL benchmark experiment

A practical methodology devoted to pool‐type phenomena simulation in safety analysis for sodium‐cooled fast reactor

CFD Analysis of the Passive Decay Heat Removal System of an LBE-Cooled Fast Reactor

Numerical Study and Assessment of a Novel Combined Passive Cooling System for Tank-in-pool Reactors

Research on Design of Natural Circulation Decay Heat Removal for Pool-type Sodium-cooled Fast Reactor

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

Numerical study of turbulent heat transfer of annular fuel assembly in a sodium-cooled fast reactor by a SST k-ω-kθ-εθ model

A CFD-BASED OPTIMIZATION DESIGN OF FLOW DISTRIBUTION DEVICE IN THE LOWER PLENUM OF INTERMEDIATE HEAT EXCHANGER OF SFR

Semi-two-dimensional transient modeling of decay heat removal to an external reactor cavity cooling system for a gFHR with effects of heat generation pattern

CFD investigation on start-up transient of HPR1000 secondary side passive residual heat removal heat exchanger

CFD simulations of Molten Salt Fast Reactor core cavity flows

The Design and CFD Simulation of a New Spent Fuel Pool Passive Cooling System

Thermal Hydraulic Analysis of a Novel Passive Residual Heat Removal System with Loop Thermosyphons for the Pool-vessel Reactor

CFD Simulations of a Loss of Heat Sink Experiment in the McMaster Nuclear Reactor

Advanced CFD modeling of rod bundle channels with integrated porous media and momentum source schemes

Conceptual design and analysis of a combined passive cooling system for both reactor and spent fuel of the pool-vessel reactor system

The design and simulation of a new spent fuel pool passive cooling system

Development of 3-D CFD Methodology to Investigate the Transient Thermal-Hydraulic Characteristics of Coolant in a Spent Fuel Pool

Numerical research on the influence of ocean conditions on the transient response of passive decay heat removal system of the floating Fluoride-Salt-Cooled High-Temperature Reactors

Numerical Investigation of Turbulent Heat Transfer Properties at Low Prandtl Number