Abstract:An essential aspect of the design of a pebble bed high-temperature gas-cooled reactor (HTGR) is the consideration of heat transfer. A particle-scale heat transfer model was developed based on the previous GPU-DEM numerical model. This model includes the heat conduction of the particles in contact, the radiative heat transfer among particles, and unidirectional convection heat transfer in the flow field. The comparison of the predicted results with the results of the TF-PBEC experiment demonstrates the accuracy of the conduction and radiation modules within the current model. Based on the current model and the porous media model, a numerical study of the natural convection heat transfer in the High-Temperature gas-cooled Reactor-Pebble-bed Module (HTR-PM) after reactor shutdown is performed. This paper systematically introduces the model design, pebble bed generation, flow field calculation, and heat transfer simulation. The results indicate that natural convection contributes to removing residual heat in the reactor core, and a higher pressure leads to better convection heat transfer. At extremely low Reynolds numbers (Re < 10), convection heat transfer is comparable to conduction and radiation, while for pressurized pebble beds (Re = 50-500), convection heat transfer dominates. Furthermore, the influence of different models used to calculate the Nusselt number of the results is compared and analyzed. For most cases, the differences in the temperature distribution of the pebble bed obtained from the different correlations are minor. However, the impact of porosity on the local Nusselt number cannot be ignored in the extremely low Reynolds numbers flows. Overall, the particle-scale heat transfer model can provide more effective reference information for the design and construction of an HTGR.

NUMERICAL ANALYSIS ON PERFORMANCE OF PASSIVE HEAT REMOVAL FROM HIGH TEMPERATURE GAS-COOLED REACTOR USING PHOENICS

Numerical Analysis of Heat Transfer Characteristics of a Falling Film Type Plate-Fin Condenser/Reboiler

Analysis of Passive Residual Heat Removal System of Modular High Temperature Gas-Cooled Reactor

Thermal Hydraulic Analysis of a Novel Passive Residual Heat Removal System with Loop Thermosyphons for the Pool-vessel Reactor

Experimental Verification on Design Model of the Passive Residual Heat Removal System of MHTGR

Transient Analysis of Residual Heat Removal System Used in 200 MW Low Temperature Heating Reactor

Calculation Analysis on the Natural Circulation of a Passive Residual Heat Removal System for IPWR

Simultaneous Approach for Simulation of A High-Temperature Gas-Cooled Reactor

Three-dimensional Numerical Investigation of Heat Transfer Process in the Reactor Cavity of HTR-10

Preliminary Investigation of THFR Passive Residual Heat Removal System

Three-Dimensional Numerical Simulation of Nuclear Heating Reactor under Asymmetric Operation Condition

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

Thermal-Hydraulic Analysis of Pebble Bed High Temperature Gas-Cooled Reactor After Shutdown Based on FLUENT Software

Thermal Hydraulic Analysis of High-Temperature Gas-Cooled Reactor Pebble-Bed Module Using a Systematic Parameter Estimation Approach

A Multi-Scale CFD-system Coupled Code for Transient Analysis of the Passive Residual Heat Removal System of MHTGR

Prediction and Analysis of Decay Heat Transfer in the Core of the Pebble Bed Reactor

Analysis of a Parallel-Channel Natural Circulation Loop in the Passive Residual Heat Removal System of the Nhr200-Ii Reactor

A CFD Method for Thermal-Hydraulic Calculation of Pebble Bed HTGRs

Modeling and Computation of Residual Heat Removal System of HTR-10 with Experimental Verification

Numerical Study of the Particle-Scale Heat Transfer in the HTR-PM Pebble Bed Based on GPU-DEM

Analysis of Transient Characteristics and Design Improvement of the Passive Residual Heat Removal System of NHR-200-II