Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Visualization of slit defect by scanning nonlinear airborne ultrasound source technique using compressed sensing

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Application of Compressed Sensing in the Guided Wave Structural Health Monitoring of Switch Rails

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Non-destructive laser-ultrasonic Synthetic Aperture Focusing Technique (SAFT) for 3D visualization of defects

Compressive sensing of phased array ultrasonic signal in defect detection: Simulation study and experimental verification

Nondestructive evaluation with fully non-contact air-coupled transducer-scanning laser Doppler vibrometer Lamb wave system

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Defect imaging based on laser ultrasonic frequency domain synthetic aperture focusing technology with separated generation–detection and 2-D equivalent velocity mapping

Non-contact imaging of subsurface defects using a scanning laser source

Testing of Thin Laminated Composite Plate with Ultrasonic Feature Scan Imaging System

Time-domain Approach for Ultrasonic Non-destructive Detection Based on Synthetic Aperture Focusing Technique

Silhouette Reconstruction of Sub-surface Defects Based on the Point-source Constrained Partial Differential Equation over the A0-mode Lamb Wave Field

Repeat scanning technology for laser ultrasonic propagation imaging

Compressive sensing of ultrasonic array data with full matrix capture in nozzle welds inspection

Micro-defect imaging with an improved resolution using nonlinear ultrasonic Lamb waves