Abstract:In the present work, novel Al2O3 particles were used to reinforce heterogeneous CoCrFeMnNi high-entropy alloy (HEA) matrix composites with nano- (5.0 wt.%) and nano- + micro- (5.0 wt.% + 10.0 wt.%) specimens. Al2O3 particles were fabricated via gas atomization and spark plasma sintering. The microstructure evolution and properties, i.e., density, hardness, and room temperature compression, were systematically investigated. The results indicate that the concentration of the Cr element in the pure CoCrFeMnNi HEA and the HEA matrix composite can be effectively reduced by using a gas-atomized HEA powder as the matrix. The formation of an impurity phase can also be inhibited, while the distribution uniformity of matrix elements can be improved. The composites prepared via gas-atomized powders formed a network microstructure composed of continuous Al2O3-rich regions and isolated Al2O3-poor regions, exhibiting good plasticity and improved density. The relative densities of the pure HEA, nano- (5.0 wt.%), and nano- + micro- (5.0 wt.% + 10.0 wt.%) composites were 98.9%, 97%, and 94.1%, respectively. The results demonstrate a significant improvement in the relative densities compared to the values (97.2%, 95.7%, and 93.8%) of the composites prepared via mechanical alloying. In addition, compared to the compressive fracture strains of nano- (5.0 wt.%) and nano- + micro- (5.0 wt.% + 10.0 wt.%) composites based on the mechanically alloyed HEA powder, the values of the nano- (5.0 wt.%) and nano- + micro- (5.0 wt.% + 10.0 wt.%) specimens prepared via gas atomization and spark plasma sintering increased by 80% and 67%, respectively.

Microstructure and mechanical properties regulation and control of in-situ TiC reinforced CoCrFeNiAl0.2 high-entropy alloy matrix composites via high-gravity combustion route

Effect of TiC addition on the microstructure and mechanical properties of FeCoCrNiMn high entropy alloy fabricated by selective laser melting

Preparation of WC/CoCrFeNiAl0.2 high-entropy-alloy composites by high-gravity combustion synthesis

Microstructures and Toughening of TiC-TiB2Ceramic Composites with Cr-Based Alloy Phase Prepared by Combustion Synthesis in High-Gravity Field

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

Boosted mechanical properties of CoCr3Fe5Ni high entropy alloy via in-situ TiC particles

Effect of TiC Addition on the High-Temperature Hardness and the Carbide Stability in Al0.2CoCrFeNi1.5Ti High-Entropy Alloy

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

The microstructural evolution and enhanced mechanical properties of in-situ Ti(C, N)-reinforced CoCrFeNiTi high-entropy alloy composites fabricated via mechanical alloying and spark plasma sintering

Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles

Microstructures and Tribological Properties of TiC Reinforced FeCoNiCuAl High-Entropy Alloy at Normal and Elevated Temperature

A new method of preparing high-performance high-entropy alloys through high-gravity combustion synthesis

Revealing the Microstructure Evolution and Mechanical Properties of Al2O3-Reinforced FCC-CoCrFeMnNi Matrix Composites Fabricated via Gas Atomization and Spark Plasma Sintering

Microstructure and properties of WC-Co/CrMnFeCoNi composite cemented carbides

Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys

Influence of in-situ and ex-situ precipitations on microstructure and mechanical properties of additive manufacturing CoCrFeMnNi high-entropy alloys

Microstructure Modification and Fracture Behavior of Solidified TiC–TiB2 Ceramic Prepared by Combustion Synthesis in Ultra-High Gravity Field

In-situ TiC/Fe0.6MnNi1.4 medium entropy alloy matrix composites with excellent strength-ductility synergy

Formation mechanism of interdiffusion layer and mechanical properties of Al 0.6 CoCrFeNi high-entropy alloy/Ti composites

Microstructure and properties of high entropy alloy reinforced titanium matrix composites

Microstructures, Densification and Mechanical Properties of TiC–Al2O3–Al Composite by Field-Activated Combustion Synthesis