Abstract:An efficient strategy using Na2SiO3 surface modification to efficiently passivate the defects at the TiO2/CsPbIBr2 interface is demonstrated. After Na2SiO3 surface treatment, the non‐radiative recombination is reduced, thereby enhancing the electron extraction efficiency. Consequently, the carbon‐based all‐inorganic CsPbIBr2 perovskite solar cells treated with Na2SiO3 yield a PCE of 10.85% with less hysteresis and improved stability. CsPbIBr2 has garnered significant interest due to its ideal bandgap and good stability. However, defects formed at the interface between the electron transport layer and the perovskite can lead to increased non‐radiative recombination, which negatively impacts both the power conversion efficiency (PCE) of perovskite solar cells and the long‐term stability of the cells. Herein, the TiO2/perovskite interface is modified by adding sodium silicate to passivate the defects on the interface. The introduction of Na+ partially reduces Ti4+ to Ti3+ in TiO2, thereby passivating trap states caused by oxygen vacancy defects and adjusting the energy level alignment between TiO2 and the perovskite film, enhancing the carrier transport efficiency. Additionally, SiO32− can form SiOPb (and Cs) bonds with the undercoordinated Pb2+ and Cs+ on the surface of the perovskite layer, effectively passivating surface defects of the perovskite film and thereby improving the efficiency of the devices. Ultimately, the carbon‐based all‐inorganic CsPbIBr2 perovskite solar cells treated with Na2SiO3 exhibit a significantly improved PCE of 10.85% compared to 8.62% of the control sample and achieve a high open‐circuit voltage of 1.31 V. With this modification, the devices also demonstrate reduced hysteresis effects and enhanced stability.

Enhancing the Performance of Carbon‐Based All‐Inorganic CsPbIBr2 Perovskite Solar Cells via Na2SiO3 Surface Treatment for Passivation of the TiO2/Perovskite Interface

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells.

Stable and highly efficient all-inorganic CsPbBr3 perovskite solar cells by interface engineering with NiO NCs modification

Enhancing the performance and stability of carbon-based CsPbI<sub>2</sub>Br perovskite solar cells via tetrabutylammonium iodide surface passivation

Effective Surface Treatment for Efficient and Stable Inverted Inorganic CsPbI2Br Perovskite Solar Cells

Enhancing the Photovoltaic Performance of CsPbI2Br Solar Cells by Adding SiO2 Nanoparticles into the Photoactive Layer

Surface Passivation of All‐Inorganic CsPbI 2 Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Bridging Effects of Sulfur Anions at Titanium Oxide and Perovskite Interfaces on Interfacial Defect Passivation and Performance Enhancement of Perovskite Solar Cells

Effective Improvement of the Carbon-Based CsPbI2Br Perovskite Solar Cells Through Additive and Interface Strategies

Enhanced Efficiency and Stability of Inverted CsPbI2Br Perovskite Solar Cells Via Fluorinated Organic Ammonium Salt Surface Passivation.

Passivation of interfacial defects of ZnO and CsPbBr3 by inserting NaSCN in all-inorganic perovskite solar cells

Advanced Modification of Perovskite Surfaces for Defect Passivation and Efficient Charge Extraction in Air-Stable CsPbBr3 Perovskite Solar Cells

Surface Passivation of Perovskite Film by Sodium Toluenesulfonate for Highly Efficient Solar Cells

A One‐Step Ionic Liquid Interface‐to‐Bulk Modification for Stable Carbon‐Based CsPbI3 Perovskite Solar Cells with Efficiency over 15%

Surface Passivation of All‐Inorganic CsPbI2Br with a Fluorinated Organic Ammonium Salt for Perovskite Solar Cells with Efficiencies over 16%

Alkali Metal Ions Passivation to Decrease Interface Defects of Perovskite Solar Cells

Surface Defects Management by In Situ Etching with Methanol for Efficient Inverted Inorganic Perovskite Solar Cells

Synergistic Effect of Surface p-Doping and Passivation Improves the Efficiency, Stability, and Reduces Lead Leakage in All-Inorganic CsPbIBr<sub>2</sub>-Based Perovskite Solar Cells

Effects of passivated molecular side group on inverted inorganic CsPbI2Br perovskite solar cells

Enhanced Charge Extraction in Carbon-Based All-Inorganic CsPbBr3 Perovskite Solar Cells by Dual-Function Interface Engineering

Optimized Interface and Recrystallized Grains by CsBr Treatment for Enhanced Photovoltaic Performance of Perovskite Solar Cells