Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Toward Ultrathin: Advances in Solution-Processed Organic Semiconductor Transistors

Editorial: High-Performance Organic Thin-Film Transistors

OFET chemical sensors: Chemical sensors based on ultrathin organic field‐effect transistors

Solution‐Processed 2D Molecular Crystals: Fabrication Techniques, Transistor Applications, and Physics

High-performance Organic Thin-film Transistors: Principles and Strategies

Thiophene Polymer Semiconductors for Organic Thin-Film Transistors.

Organic Semiconductor/Polymer Blend Films for Organic Field‐Effect Transistors

Unidirectional coating technology for organic field-effect transistors: materials and methods

Organic Field‐Effect Transistors: Challenges and Emerging Opportunities in High‐Mobility and Low‐Energy‐Consumption Organic Field‐Effect Transistors (Adv. Energy Mater. 29/2020)

Tuning Electrode Work Function and Surface Energy for Solution Shearing High-Performance Organic Field-Effect Transistors

Sub-thermionic, ultra-high-gain organic transistors and circuits

High-Performance Ultra-Low-Power OFET Based on Anodized TiOx Dielectric and Solution-sheared Organic Single Crystal

Materials for Printed Organic Thin-Film Transistors

Solution-Processed, Large-Area, Two-Dimensional Crystals of Organic Semiconductors for Field-Effect Transistors and Phototransistors

Organic single crystal phototransistors: Recent approaches and achievements

Balancing the film strain of organic semiconductors for ultrastable organic transistors with a five-year lifetime

One-dimensional (1D) Micro/nanostructures of Organic Semiconductors for Field-Effect Transistors

An Ultra Closely π-Stacked Organic Semiconductor for High Performance Field-Effect Transistors

Organic Semiconductors: Thiazole‐Based Organic Semiconductors for Organic Electronics (Adv. Mater. 23/2012)

Organic transistor‐based integrated circuits for future smart life

Pursuing Polymer Dielectric Interfacial Effect in Organic Transistors for Photosensing Performance Optimization.