Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

An Ultra Closely π-Stacked Organic Semiconductor for High Performance Field-Effect Transistors

An Ultra Closely Pi-Stacked Organic Semiconductor For High Performance Field-Effect Transistors

An Ultra Closely [pgr]-Stacked Organic Semiconductor for High Performance Field-Effect Transistors

Vertical Organic Electrochemical Transistors for Complementary Circuits

A high-performance organic thin-film transistor with Parylene/PMMA bilayer insulation based on P3HT

High-performance Organic Thin-film Transistors: Principles and Strategies

Planar Nanoscale Architecture for Organic Thin-Film Field-Effect Transistors

A Highly Pi-Stacked Organic Semiconductor for Field-Effect Transistors Based on Linearly Condensed Pentathienoacene.

Stacked pentacene layer organic thin-film transistors with improved characteristics

Organic Thin-Film Transistors of Phthalocyanines

Editorial: High-Performance Organic Thin-Film Transistors

High-Performance Ultra-Low-Power OFET Based on Anodized TiOx Dielectric and Solution-sheared Organic Single Crystal

High-Performance and Operationally Stable Organic Thin-Film Transistors Using Bi-Buffer Layers with Low-Cost Electrodes

Study on Stability of Organic Field-effect Transistors Based on CuPc

Sub-thermionic, ultra-high-gain organic transistors and circuits

Ultralow contact resistance in organic transistors via orbital hybridization

Ultrahigh Mobility and Efficient Charge Injection in Monolayer Organic Thin-Film Transistors on Boron Nitride.

Organic Thin-Film Transistors In Sandwich Configuration

Liquid Crystal-Like Active Layer for High-Performance Organic Field-Effect Transistors

High-performance, stable organic field-effect transistors based on trans-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene

Thiophene Polymer Semiconductors for Organic Thin-Film Transistors.