Abstract:Recently, black phosphorus (BP) has attracted enormous attention as the potential materials for next‐generation photonic device applications due to the high carrier mobility and the narrow bandgap. However, the metal–semiconductor–metal (MSM) structure of BP photodetectors cannot achieve simultaneously high photoresponsivity and fast photoresponse, due to its natural surface defects, the thinness of absorption layer, and the instability of BP in the air, which limits the application of BP MSM structure photodetectors. Here, infrared photodetectors with the multilayer BP sandwiched between the top protective layer of boron nitride and the bottom Au electrodes are demonstrated. The BP photodetectors exhibit a fast photoresponse of ≈16 µs, a broadband photodetection up to ≈2 µm, a high light on/off ratio of ≈103 which is higher than most BP photodetectors, together with an acceptable photoresponsivity of ≈1.55 A W−1 for the wavelength of 1550 nm at room temperature. Scanning photocurrent microscopy measurements show that the mechanism of BP photodetectors is a combination of photovoltaic effect and photoconductive effect. This work demonstrates an effective way to design high‐performance photovoltaic/photoconductive devices based on 2D materials. Infrared photodetectors with the multilayer black phosphorus (BP) sandwiched between the top protective layer of boron nitride and bottom Au electrodes are demonstrated. The BP photodetectors exhibit a high light on/off ratio of ≈103, a fast photoresponse of ≈16 μs for the wavelength of 1550 nm and a broadband photodetection up to ≈2 μm.

Black Phosphorus Molybdenum Disulfide Midwave Infrared Photodiodes with Broadband Absorption-Increasing Metasurfaces

Chalcogenide Glass Waveguide-Integrated Black Phosphorus Mid-Infrared Photodetectors

An All‐Silicon Metalens Integrated with a Mid‐Wave Infrared Black Phosphorus Photodiode

Black Phosphorus Mid-Infrared Photodetectors with High Gain

Black Phosphorus Infrared Photodetectors with Fast Response and High Photoresponsivity

Black Phosphorus for Mid-Infrared Optoelectronics: Photophysics, Scalable Processing, and Device Applications

Black phosphorus-based van der Waals heterostructures for mid-infrared light-emission applications

Non-volatile 2D MoS2/black phosphorus heterojunction photodiodes in the near- to mid-infrared region

Fully Depleted Self‐Aligned Heterosandwiched Van Der Waals Photodetectors

Single-detector Black Phosphorus Monolithic Spectrometer with High Spectral and Temporal Resolution

Mid-infrared Waveguide Integrated Chalcogenide Glass on Black Phosphorus Photodetectors

Wide-angle ultrabroadband absorption in black phosphorus/dielectric multilayer anisotropic metamaterials

Tunable anisotropic absorption in monolayer black phosphorus using critical coupling

Tunable Anisotropic Perfect Enhancement Absorption in Black Phosphorus-Based Metasurfaces

Anisotropic infrared absorption in monolayer black phosphorus metasurface with / without local oxidative effect

High-responsivity, high-detectivity, broadband infrared photodetector based on MoS2/BP/MoS2 junction field-effect transistor

High-Performance Infrared Detectors Based on Black Phosphorus/Carbon Nanotube Heterojunctions

Black phosphorus van der Waals heterostructures light emitting diodes for mid-infrared silicon photonics

High Performance Near Infrared Photodetector Based on In-Plane Black Phosphorus P-N Homojunction

Infrared absorber based on sandwiched two-dimensional black phosphorus metamaterials

Wavelength-Tunable Mid-Infrared Lasing from Black Phosphorus Nanosheets