Abstract:Dr. C. H. DESCH delivered a Research and Development Lecture under the auspices of the Royal Institution and the British Science Guild on February 6, taking as his subject “The Microscope and the Metal Industry”. Although a careful drawing of a metallic object (the edge of a razor) was published by Robert Hooke in 1665, it was two hundred years before any further use was made of the microscope in the study of metals. H. C. Sorby, a Sheffield amateur, began in 1854 to apply the microscope to polished and etched surfaces of steel and succeeded in identifying correctly a number of separate constituents in the varieties of steel and cast iron available to him. It was twenty years before these results attracted any attention, but from that time onwards, the microscope has become an indispensable tool in the metallurgical industry. Specimens of metals are ground and polished, care being taken to avoid distortion, and are then etched by means of a suitable reagent which will distinguish between the various constituents. All metals and alloys are built up of crystals, and the relative sizes of the component crystals frequently determine the properties of the mass. With this object in view, systematic measurements of crystal size are made as metals are passing through the processes of manufacture. The reading of a micro-section may be compared with the reading of a map, which conveys the more information the greater the experience of the person using it. A further important application of the microscope is in the study of failures. The fracture of crankshafts and other moving parts by fatigue, the cracking of boiler plates and superheater tubes, the breakage of wire ropes, and the cracking of severely cold-worked sheets, are typical examples of occurrences on which the microscope is capable of throwing light by indicating the nature of the processes concerned in the failure, and thereby giving a clue as to their origin. The microscope has now become an essential part of the equipment of every works dealing with the production of metal, and also with the transformation of metals into useful products on a large scale.

Metallographic Practices Generally Applicable to All Metals

Metallographic Specimen Preparation: Optical And Electron Microscopy

Preparation Method for Metallographic Specimen of Iron-Carbon and Silicon-aluminium Alloy

The Microscope and the Metal Industries

Sample Preparation Methodologies for In Situ Liquid and Gaseous Cell Analytical Transmission Electron Microscopy of Electropolished Specimens

Observations on the Polishing of Metals

Development of polishing machine for preparation metallographic specimen with re-manufacturing

Polishing of additive manufactured metallic components: retrospect on existing methods and future prospects

Study on Metallographic Techniques for Cast Mg Alloy

Microstructural, mechanical, ionic release and tarnish resistance characterization of porcelain fused to metal Co-Cr alloys manufactured via casting and three different CAD/CAM techniques

Tissue Preparation for Microscopy and Histology

Development and application of a dry ultramicrotomy technique for the preparation of galvanneal sheet coatings

Recent metrological approaches relevant to the characterisation of hardmetals

Method for the Detection of Grain Boundaries in α Ti-Based Alloys by means of Polarized Light Microscopy and Image Processing in MATLAB

Challenges and possibilities of the manual metallographic serial sectioning process using the example of a quantitative microstructural analysis of graphite in cast iron

Sample preparation methods for optimal HS-AFM analysis: Duplex stainless steel

Metal and metal oxide nanomaterials in sample preparation

Revolutionizing Grain and Particle Size Measurement in Metals: The Role of Sensor-Assisted Metallographic Image Analysis

Chemical Mechanical Polishing Method and Practice

Semi-automatic miniature specimen testing method to characterize the plasticity and fracture properties of metals

Impact of surface preparation on the formation of deformation-induced α‘-martensite in a metastable austenitic steel